- ARDEX ST Elastic Silicone Sealant is ideal for movement joints, corner and connecting joints in bathrooms, showers and living areas, and doors and windows abutting tiles.
- Excellent resistance to weather, UV-radiation and commonly used cleaning chemicals and disinfectants
- Contains fungicide to prevent the growth of fungi and moulds
- Neutral cure and low odour
- Minimises discolouration and is suitable for most surface finishes, including natural stone
- Suitable for wall and floor applications
- Suitable for internal and external areas
- Suitable for use with underfloor heating
Colours Available: Transparent and 13 colours designed to match the most popular ARDEX-FLEX Flexible Tile Grout colours
Unit Size Available: 310ml
ARDEX ST Silicon
990.00ден
Code: –
Barcode: –
Suitable for External Use or Wet Areas
Yes
Not suitable for swimming pools
Suitable for Use with Under Tile Heating
Yes
Skin Forming Time
5 minutes
Coverage
Approximately 9m per 310ml cartridge with a 6x6mm bead
990.00ден
Code: –
Barcode: –
Material basis: Silicone, acetic acid hardening
Components: 1-component
Consistency: pasty
Specific weight DIN 52451: approx. 1.0 g / cm³
Joint width : up to 30 mm
Processing temperature : +5 ° C to +40 ° C (substrate temperature)
Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable
Hardening speed *: approx. 2 mm / day – approx. 7 mm / week
Temperature resistance: -40 ° C to +180 ° C
Practical elasticity: approx. 25% of the joint width
E -Module 100%: approx. 0.40 N / mm² (DIN EN 28339 method A)
Shore A hardness: that. 25
Consumption:
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.
* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed.
Labeling according to GHS / CLP : see safety data sheet
Labeling according to ADR: see safety
data sheet Packing: Cartridge with 310 ml net, packed in 12 and 20 pieces
Storage: Can be stored in cool and dry rooms for approx. 24 months in the originally closed container
544.00ден
Code:
Barcode:
Package size: 310 ml cartridge
Consumption: approx. 10 bm, (from 1 cartridge approx. 10 bm of 5 mm wide joint)
Walkability: about after 2-3 days
407.00ден
Article No.: 1171
Barcode: 9006445040114
Use:
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
Reviews
There are no reviews yet.