Product Code: 1159
Barcode: 404705611121
Usage:

• Sealing tape for flexible and impermeable bridging of movement joints, edge joints as well as crack-prone connections and penetrations.
• The ARDEX TRICOM sealing set includes ribbons, corners and cuffs. It can be used in conjunction with all ARDEX composite seals and is suitable for all load classes.
• impermeable to water and weatherproof
• highly tear-resistant and stretchable
• alkali resistant
• resistant to aggressive media

Color: white
Weight approx.: 180 g / m ²
Thickness: 0.32 mm
Width: 120 mm
Temperature resistance: -35 ° C to + 90 ° C
Folding bending test at -20 ° C: no cracks
Bursting pressure: 1.5 bar
Permissible motion recording: Max. 80% of the joint width
Packing: Carton with 1 roll of 50 m each; Carton with 1 roll each at 10 m
Storage: In cool, dry rooms approx. Can be stored for 24 months in the original closed container.

• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Product Code: 1160 & 2090 (10ml)
Barcode: 4024705702935 & 4024705702928 (10ml)
Color: White with grey drop pattern
Membrane width: approx. 1.0 m
Fracture strain lengthwise: 82.5 % at 99.8 N/15 mm
Fracture strain crosswise: 73.7 % at 46.5 N/15 mm
Total thickness: 0.51 mm
Total weight: 315 g/m²
Burst load: 3.0 bar
Crack bridging: > 0,4 mm
Adhesive tensile strength: > 0,2 N / mm2
SD value: > 85 m
UV resistance: < 500 hours
Identification as per GHS/CLP: none
Identification as per ADR: none
Packaging: carton with 1 roll each
Roll length: 30 m or 10 m
Storage and shelf life: in a cool, dry space. in original packaging, approx. 24 months

Product Code: 1008 & 1009

Barcode: 4024705571760 & 4024705571692

Package: 20kg & 4kg

One-Component Waterproofing and Crack Isolation Membrane

Flexible, topside waterproofing for interior floors and walls

Crack isolation up to 1/8″ (3 mm)

Highly workable consistency; minimal drips and splatters

Working Time: Unlimited. Seal unused portion to prevent product from drying out.
Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours

Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).

Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4).
Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
Shelf Life: 12 months

Product Code: 1350
Barcode: 4024705581363
Install tile: in just 90 minutes and flood test in 4 hours
Crack isolation: up to 1/8″ (3 mm)
Zero water penetration: via wind-driven rain
Drying Time: 30 – 45 minutes for initial coat; Approx. 60 minutes for final coat
Flood Test: Begin 4 hours after the second coat has been applied
Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing.
Shelf Life: 1 year
Warranty: ARDEX L.P. Standard Limited Warranty applies

Product Code: 10616
Barcode: 9006445047298
Packaging: bags of 25 kg net
Cement base
Meets the C2 requirements according to EN 12004
Waterproof
Frost resistant
Flexible
Setting and laying of earthenware tiles,
Stoneware and porcelain stoneware as well
Insulation materials
High area coverage thanks to low consumption
Good stability
Easy processability
Long processing time
Storage: can be stored in dry rooms for about 12 months in the originally closed container
Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder
Bulk weight: about 1.2 kg / l
Fresh weight of the mortar: about 1.5 kg / l
Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm

Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.