• ready for processing
• quick reacting
• sprayable

High quality, single-component, polystyrene-filled, quick-reacting, plastic-tempered bitumen cover coating. Indoors and outdoors for manual production of permanent, flexible seals of structures in contact with the ground, in contact with the ground.

Material information:

– If processing outside the ideal temperature and/or humidity range the material properties could change markedly.

– Bring the materials to the proper temperature before processing!

– In order to maintain the product properties, do not add any foreign materials!

– Water dosing quantities or dilution information must be strictly adhered to!

– Check tinted products for colour accuracy before application!

– Colour consistency can only be guaranteed within the same batch.

– The colour formation is significantly impacted by the environmental conditions. Environmental information:

– Do not process at temperatures below +5 °C!

– The ideal temperature range for the material, substrate and air is + 15 °C to + 25 °C.

– The ideal relative humidity range is 40% to 60%.

-Increased air humidity and/or lower temperatures may prolong the drying, setting and hardening time, while lower air humidity and/or higher temper atures will speed it up.

– Ensure adequate ventilation during the drying, reaction and hardening phase; avoid draughts!

– Protect against direct sunlight, wind and weather!

– Protect adjacent components!