• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Product Code: –

Barcode: –

Open Time: Up to 30 minutes
Pot Life: Approx. 1 hour
Adjustment Time: Approx. 15 – 20 minutes
Time to Grout: 2 hours
Color: Gray and White
VOC: 0
Packaging: 40 lb. (18 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened

Mixing Ratio:

5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume

Approximate Coverage per 40 lbs. (18 kg) bag:

1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)

Product Code: 10616
Barcode: 9006445047298
Packaging: bags of 25 kg net
Cement base
Meets the C2 requirements according to EN 12004
Waterproof
Frost resistant
Flexible
Setting and laying of earthenware tiles,
Stoneware and porcelain stoneware as well
Insulation materials
High area coverage thanks to low consumption
Good stability
Easy processability
Long processing time
Storage: can be stored in dry rooms for about 12 months in the originally closed container
Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder
Bulk weight: about 1.2 kg / l
Fresh weight of the mortar: about 1.5 kg / l
Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm

Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder
Bulk 
weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l
material requirements:  at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .

The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method.
Processing time (+20 ° C): approx. 30 minutes
Accessibility (+20 ° C): after approx. 90 minutes
Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm²
floor heating suitability: yes
labeling according to GHS / CLP: see safety
labeling ADR: see safety
packaging: bag with 5 kg of net packed into 4 pieces
storage: Can be stored in dry rooms for approx. 12 months in the originally closed container

Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.