White flexible, thin-layer adhesive (C2TE, EN 12004) for gluing tiles and low-absorbency ceramics, mosaics, stone, on all common building substrates.
for indoor and outdoor use
extended open time
suitable for underfloor heating
Before starting work, it is necessary to check the suitability of the substrate. It is necessary to properly prepare gypsum substrates in damp areas (kitchens, bathrooms) before laying, applying foundations or waterproofing, see ÖNORM B 2207, standard contract for the laying of ceramic tiles, cooler tiles and mosaics.
Be the first to review “Baumit Baumacol FlexUni White” Cancel reply
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Flex joint mortar for wide joints. Indoor and outdoor, on the wall and floor.
ARDEX G 7 FLEX 2-15 is particularly suitable for wide joints and large areas. The high deformability and good flank adhesion reduce stress on thermally stressed surfaces and contribute significantly to the safety of the coverings. After hardening, ARDEX G 7 FLEX has 2-15 water and dirt repellent properties, which ensure a long-lasting beautiful look and thus maintain the value of the coverings. ARDEX G 7 FLEX 2-15 is easy to process, has a high filling power and does not burn up. The area of application includes joints of tiles made of earthenware, stoneware and porcelain stoneware, split and clinker plates as well as non-humid sensitive natural and concrete stone slabs on the wall and floor, indoors and outdoors.ARDEX G 7 FLEX 2-15 meets the requirements CG2 WA according to EN 13888 and is very low in emissions – EC 1 PLUS – according to GEV EMICODE.
PRODUCT HIGHLIGHTS:
cement-bound flex grout
ideal for large areas
highly deformable
good flank adhesion
water and dirt repellent
high strength
suitable for floor and wall heating
Colours: Gray, Zement grey, Silbergray, Basalt Mixing ratio approx. Component AComponent B
2.4 l water 12.5 kg powder
1 RT water 4 RT powder applies to: Joint width 10 mm, joint depth 5 mm for tiles Material requirements approx. Length in cm Width in cm Consumption
60 60 0.30 kg / m ²
30 60 0.40 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ² Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method Bulk weight approx.: 1.40 kg / l Fresh weight approx.: 2.10 kg / l Processing time approx.:45 minute ( n ) Accessibility after approx.:90 minute ( n ) Application of environmental conditions: + 20 ° C Ball pressure hardness approx.: hardness time
40 N / mm ² after 1 day
50 N / mm ² after 3 days
60 N / mm ² after 7 days
70 N / mm ² after 28 days Floor heating suitability: Yes packaging: Sacks with 12.5 kg net storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Open Time: Up to 30 minutes Pot Life: Approx. 1 hour Adjustment Time: Approx. 15 – 20 minutes Time to Grout: 2 hours Color: Gray and White VOC: 0 Packaging: 40 lb. (18 kg) bag Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Shelf Life: 1 year, if unopened
Mixing Ratio:
5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume
Approximate Coverage per 40 lbs. (18 kg) bag:
1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)
Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Product Code:
1167 Barcode:
9006445046352 Colors Available: Grey Unit Size Available: 20kg Suitable for External Use or Wet Areas
Yes, including swimming pools Suitable for Use with Under Tile Heating Yes Bed Thickness
1-6mm Pot Life
3 hours Open Time
60 minutes Adjustment Time 30 minutes Grout After 24 hours Coverage Approximately 5.6m2 at 3mm thick per 20kg bag
Use:
Inside and outside. Floor and wall.
For grouting
Tiles made of earthenware, stoneware and porcelain stoneware
Natural and concrete slabs ( insensitive to moisture )
Fission and clinker plates
Facade strap
Blending and visible masonry
Glass blocks.
For joint widths of 2 – 15 mm. Colours: gray Mixing ratio approx. Component AComponent B
2.5 l water 12.5 kg powder
1 RT water 3.4 RT powder applies to: Joint width 10 mm, joint depth 5 mm for tiles Material requirements approx. Length in cm Width in cm Consumption
60 60 0.20 kg / m ²
30 60 0.30 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ² Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method Bulk weight approx.: 1.50 kg / l Fresh weight approx.: 2.20 kg / l Processing time approx.: 90 minute ( n ) Accessibility after approx.: 5 hours ( n ) Application of environmental conditions: + 20 ° C Ball pressure hardness approx.: hardness time
60 N / mm ² after 1 day
80 N / mm ² after 3 days
100 N / mm ² after 7 days
120 N / mm ² after 28 days Floor heating suitability: Yes Tested according to DIN EN 13888: CG2 A packaging: Sacks with 12.5 kg net storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Reviews
There are no reviews yet.