PRODUCT CODE: 2955
SIZE: 20 x 120 x 9mm
SERIES: Alpine
CODE: 1st class
TYPE: Porcelain Tiles
FINISH: Matt
THICKNESS: 9.5 mm
WEIGHT PER BOX: 23.5 kg
LOOK: Wood
COLOR: RedWood
QUANTITY FOR BOX: 1.2m2 (5 pcs)
BOXES FOR PALLETS: 45 (54 m2)
PRODUCT CODE: 10849
FINISH: Matt
CLASS: 1st
WEIGHT PER BOX: 22 kg
COLOR: Light Grey
QUANTITY FOR BOX: 1.15 m2 (13 pcs)
BOXES FOR PALLETS: 55 (63.25 m2)
KG/PALLETS: 1245 kg
Thickness: 10 mm
Width: 192.5 mm
Size: 1200 mm
Class: AC 4 – 32nd Class
Product Code: 2089
Barcode: 9006445040220
Install tile: in just 90 minutes and flood test in 4 hours
Crack isolation: up to 1/8″ (3 mm)
Zero water penetration: via wind-driven rain
Drying Time: 30 – 45 minutes for initial coat; Approx. 60 minutes for final coat
Flood Test: Begin 4 hours after the second coat has been applied
Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing.
Shelf Life: 1 year
Warranty: ARDEX L.P. Standard Limited Warranty applies
Product Code: 1010
Barcode: 9006445040237
Install tile: in just 90 minutes and flood test in 4 hours
Crack isolation: up to 1/8″ (3 mm)
Zero water penetration: via wind-driven rain
Drying Time: 30 – 45 minutes for initial coat; Approx. 60 minutes for final coat
Flood Test: Begin 4 hours after the second coat has been applied
Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing.
Shelf Life: 1 year
Warranty: ARDEX L.P. Standard Limited Warranty applies
Product Code: 1011
Barcode: 9006445040244
Install tile: in just 90 minutes and flood test in 4 hours
Crack isolation: up to 1/8″ (3 mm)
Zero water penetration: via wind-driven rain
Drying Time: 30 – 45 minutes for initial coat; Approx. 60 minutes for final coat
Flood Test: Begin 4 hours after the second coat has been applied
Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing.
Shelf Life: 1 year
Warranty: ARDEX L.P. Standard Limited Warranty applies
Product Code: 1350
Barcode: 4024705581363
Install tile: in just 90 minutes and flood test in 4 hours
Crack isolation: up to 1/8″ (3 mm)
Zero water penetration: via wind-driven rain
Drying Time: 30 – 45 minutes for initial coat; Approx. 60 minutes for final coat
Flood Test: Begin 4 hours after the second coat has been applied
Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing.
Shelf Life: 1 year
Warranty: ARDEX L.P. Standard Limited Warranty applies
- Compensate and repair stairs and platforms.
- Filling holes, depressions and eruptions in screeds and concrete floors.
- Sample of height offsets and bumps on all suitable substrates.
- For indoor use, floor.
Ready to install after approx.: 1 hour
Mixing ratio approx.:
Component A Component B
- 3.4 – 4 l water 12.5 kg powder
- 1 RT water 2.5 RT powder
Material requirements: 1.25 kg powder per m ² and mm
Bulk weight approx.: 1.30 kg / l
Fresh weight approx.: 1.70 kg / l
Processing time approx.: 15 minute ( n )
Accessibility after approx.: 1 hour ( n )
Application of environmental conditions: + 20 ° C
Bending tensile strength approx. time:
- 5.0 N / mm ² – after 1 day
- 6.0 N / mm ² – after 7 days
- 7.0 N / mm ² – after 28 days
Compressive strength of approx. time:
- 21 N / mm ² – after 1 day
- 29 N / mm ² – after 7 days
- 35 N / mm ² – after 28 days
Floor heating suitability: Yes
Chair roll suitability: Yes
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
- Bags with 25.00 kg net
- 40 VPE / pallet
Printing strength: after 28 days approximately 8.00 N / mm ²
Bending strength: after 28 days approximately 4.00 N / mm ²
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
- Cement-based
- For smoothing and filling cavities
- Water- and weatherproof
Compressive strength:
- after 7 days, approx. 8 N/mm²
- after 28 days, approx. 10 N/mm²
Bending tensile strength:
- after 7 days, approx. 3 N/mm²
- after 28 days, approx. 5 N/mm²
Mixing ratio: approx. 8.5 l water : 25 kg powder corresponding to approx. 1 RT water : 2 ¾ RT powder
Bulk weight: approx. 1.1 kg/l
Fresh weight of mortar: approx. 1.7 kg/l
Material requirements: approx. 1.2 kg powder per m² and mm
Working time (+20°C): approx. 45 minutes
pH value: approx. 12
Corrosion behaviour: contains no components that have a corrosive effect on steel Identification as per GHS/CLP: GHS05 “corrosive”,
Signal word: danger Identification as per ADR: none
Storage: can be stored in a dry space in the originally sealed container for approximately 12 months
- Cement-based
- Indoor and outdoor, wall and floor
- Long cement-based smoothing and fine-repair mortar, gray
Mixing ratio: approx. 6.25 – 6.75 l of water: 25 kg of powder accordingly approx. 1 RT water: 2 ¾ RT powder
Volumetric weight: approx. 1.6 kg/l
Weight of fresh mortar: approx. 1.7 kg/l
Bulk weight: approx. 1.1 kg/l
Material requirements: approx. 1.4 kg of dust / m2/mm
Processing time (+20°C): approx. 4 o’clock
Compressive strength:
- after 7 days approx. 8 N/mm2
- After 28 days approx. 18 N/mm²
Flexural strength:
- after 7 days approx. 3 N/mm2
- After 28 days approx. 5 N/mm²
pH value: approx. 12
Corrosion effect: Does not contain corrosion corrosion causative ingredients
Storage: In dry rooms, originally closed packaging
Skinning Time: 7-10 minutes
Curing Time: 24 hours
Shrinkage: < 1%
Operating Temperature: -40⁰F – 194⁰F (-40⁰C – 90⁰C)
Practical Expansion: 25%
Coverage per Package: 1/4″ (6 mm) Bead. 32 linear ft. (9.75 linear m). 1/8″ (3 mm) Bead. 64 linear ft. (19.5 linear m).
Hardness Shore A: Approx. 40
Shear Adhesion Strength: >290 psi (2 N/sq. mm)
Tensile Adhesion Strength: 145 psi (1 N/sq. mm)
Shelf Life: 18 months, if unopened
VOC: 0
Warranty: ARDEX L.P. Standard Limited Warranty Applies
Usage:
- cement-bound grout
- for grouting ceramic tiles and slabs as well as glass mosaic, glass tiles and natural stone
- increased color stability
- for joint widths of 1 – 10 mm
- good flank adhesion
- easy to insert with a long wash window
- no burning
Mixing ratio:
- 1.7 l water: 5 kg powder
- 4.25 l water: 12.5 kg powder
Bulk weight: approx.1.1 kg / l
Fresh weight: approx.1.8 kg / l
Material requirements: with joint width 3 mm, joint depth 5 mm for tiles or. Middle mosaic
| 60 x 60 cm | approx. 0.1 kg / m ² |
| 30 x 60 cm | approx. 0.15 kg / m ² |
| 30 x 30 cm | approx. 0.2 kg / m ² |
| 15 x 15 cm | approx. 0.35 kg / m ² |
| 10 x 10 cm | approx. 0.45 kg / m ² |
| 5 x 5 cm | approx. 0.9 kg / m ² |
The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on the surface quality and working method.
Processing time ( + 20 ° C ): approx. 30 minutes
Accessibility ( + 20 ° C ): after approx. 3 hours
Ball pressure hardness:
- after 1 day approx. 27 N / mm ²
- after 3 days approx. 43 N / mm ²
- after 7/28 days approx. 48 N / mm ²
Suitable for floor heating: Yes
Labeling according to GHS / CLP: see safety data sheet
Labeling according to ADR: see safety data sheet
EMICODE: EC1 PLUS – very low emission PLUS
GISCODE: ZP1 = cement-containing product, low chromate
Packing: Plastic bucket with 5 kg net; Sacks with 12.5 kg net
Storage: in dry rooms approx. Can be stored for 12 months in the original closed container.