CARTRIDGE BOX
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Categories: Acryl, Building Materials, Silicon, Wall Fillers
Tags: Acryl, Fillers, Wall
Brand: Ardex
Ardex RF
407.00ден
Article No.: 1171
Barcode: 9006445040114
Use:
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
1,000.00ден / sq m
PRODUCT CODE: 2954
SIZE: 30 x 90 x 8mm RC
SERIES: Princess
TYPE: White Body
FINISH: Semi Glossy
THICKNESS: 8 mm
WEIGHT PER BOX: 19.25 kg
COLOR: White
QUANTITY FOR BOX: 1.35 m2 (5 pcs)
BOXES FOR PALLETS: 54 (72.9 m2)
410.00ден
Article No.: 1934
Barcode: 3800866001640
Water vapour permeability: ≤ 15
Max. thickness: 25 per coat (on a new substrate)
Mortar group: CS II
4,049.00ден
Article No.: –
Barcode: 4024705325547
Packing: Bucket with 18 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Material requirements approx.: 1.2 kg per m ² and mm
Consumption: Execution level:
0.2 kg / m ² 1
0.1 kg / m ² 2 based on 1
0.2 kg / m ² 3 based on 2
1.2 kg / m ² 4, full-surface filling per mm
Fresh weight approx.: 1.20 kg / l
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
2,340.00ден / sq m
PRODUCT CODE: 2964
SIZE: 30 x 90 x 8mm RC
CODE: 1st class
TYPE: White Body
FINISH: Semi Glossy
THICKNESS: 8 mm
WEIGHT PER BOX: 19.25 kg
COLOR: White
QUANTITY FOR BOX: 1.35 m2 (5 pcs)
BOXES FOR PALLETS: 54 (72.9m2)
2,299.00ден
Article No.: 1165
Barcode: 9006445046277
Packaging: 12.5 KG PAPER BAG
Usage:
- Compensate and repair stairs and platforms.
- Filling holes, depressions and eruptions in screeds and concrete floors.
- Sample of height offsets and bumps on all suitable substrates.
- For indoor use, floor.
Ready to install after approx.: 1 hour
Mixing ratio approx.:
Component A Component B
- 3.4 – 4 l water 12.5 kg powder
- 1 RT water 2.5 RT powder
Material requirements: 1.25 kg powder per m ² and mm
Bulk weight approx.: 1.30 kg / l
Fresh weight approx.: 1.70 kg / l
Processing time approx.: 15 minute ( n )
Accessibility after approx.: 1 hour ( n )
Application of environmental conditions: + 20 ° C
Bending tensile strength approx. time:
- 5.0 N / mm ² – after 1 day
- 6.0 N / mm ² – after 7 days
- 7.0 N / mm ² – after 28 days
Compressive strength of approx. time:
- 21 N / mm ² – after 1 day
- 29 N / mm ² – after 7 days
- 35 N / mm ² – after 28 days
Floor heating suitability: Yes
Chair roll suitability: Yes
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Price range: 1,000.00ден through 1,100.00ден / sq m
1,350.00ден / sq m
PRODUCT CODE: 4688
SIZE: 60 x 119.7 x 9mm
SERIES: Jewels
CODE: 15
STYLE: Classic
THICKNESS: 9mm
WEIGHT PER BOX: 29,14kg
EFFECT: Marble
SURFACE: Glossy
QUANTITY FOR BOX: 1.44 m2
BOXES FOR PALLETS: 15
Price range: 753.00ден through 1,100.00ден / sq m
990.00ден
Code: –
Barcode: –
Material basis: Silicone, acetic acid hardening
Components: 1-component
Consistency: pasty
Specific weight DIN 52451: approx. 1.0 g / cm³
Joint width : up to 30 mm
Processing temperature : +5 ° C to +40 ° C (substrate temperature)
Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable
Hardening speed *: approx. 2 mm / day – approx. 7 mm / week
Temperature resistance: -40 ° C to +180 ° C
Practical elasticity: approx. 25% of the joint width
E -Module 100%: approx. 0.40 N / mm² (DIN EN 28339 method A)
Shore A hardness: that. 25
Consumption:
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.
* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed.
Labeling according to GHS / CLP : see safety data sheet
Labeling according to ADR: see safety
data sheet Packing: Cartridge with 310 ml net, packed in 12 and 20 pieces
Storage: Can be stored in cool and dry rooms for approx. 24 months in the originally closed container
4,870.00ден
Article No.: 3474
Barcode: 9006445047649
Packaging: 25 kg paper bag
Use:
- Cement-based
- Indoor and outdoor, wall and floor
- Long cement-based smoothing and fine-repair mortar, gray
Mixing ratio: approx. 6.25 – 6.75 l of water: 25 kg of powder accordingly approx. 1 RT water: 2 ¾ RT powder
Volumetric weight: approx. 1.6 kg/l
Weight of fresh mortar: approx. 1.7 kg/l
Bulk weight: approx. 1.1 kg/l
Material requirements: approx. 1.4 kg of dust / m2/mm
Processing time (+20°C): approx. 4 o’clock
Compressive strength:
- after 7 days approx. 8 N/mm2
- After 28 days approx. 18 N/mm²
Flexural strength:
- after 7 days approx. 3 N/mm2
- After 28 days approx. 5 N/mm²
pH value: approx. 12
Corrosion effect: Does not contain corrosion corrosion causative ingredients
Storage: In dry rooms, originally closed packaging
Price range: 1,550.00ден through 1,720.00ден / sq m
4,180.00ден
Use: On plaster plastic base For smoothing and filling walls and ceilings.
This wall equalization is the ideal product for making flat, smooth and stress-free walls and ceilings.
Article No.: 1059
Barcode: 9006445040114
Packing: Bucket with 25 kg net
pH value: approximately 8.00
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
- Bags with 25.00 kg net
- 40 VPE / pallet
Printing strength: after 28 days approximately 8.00 N / mm ²
Bending strength: after 28 days approximately 4.00 N / mm ²