• Code: 2494
• Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Product Code: 1089
Barcode: 9006445046499
Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder
Bulk weight: approx. 1.4 kg/l
Fresh weight of the mortar: approx. 1.6 kg/l
Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm
Working time (at +20°C): approx. 4 hours
Laying time: approx. 30 minutes
Correction time: approx. 15–20 minutes
Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible
Grouting of walls (at +20°C): after approx. 8 hours
underfloor heating suitability: yes
Packaging: bags of 25 kg, net
Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging

Product Code:
1167
Barcode:
9006445046352
Colors Available: Grey
Unit Size Available: 20kg
Suitable for External Use or Wet Areas
Yes, including swimming pools
Suitable for Use with Under Tile Heating
Yes
Bed Thickness
1-6mm
Pot Life
3 hours
Open Time
60 minutes
Adjustment Time
30 minutes
Grout After
24 hours
Coverage
Approximately 5.6m² at 3mm thick per 20kg bag

Product Code: 1011
Barcode: 9006445040244
Install tile: in just 90 minutes and flood test in 4 hours
Crack isolation: up to 1/8″ (3 mm)
Zero water penetration: via wind-driven rain
Drying Time: 30 – 45 minutes for initial coat; Approx. 60 minutes for final coat
Flood Test: Begin 4 hours after the second coat has been applied
Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing.
Shelf Life: 1 year
Warranty: ARDEX L.P. Standard Limited Warranty applies

Product Code: 1159
Barcode: 404705611121
Usage:

• Sealing tape for flexible and impermeable bridging of movement joints, edge joints as well as crack-prone connections and penetrations.
• The ARDEX TRICOM sealing set includes ribbons, corners and cuffs. It can be used in conjunction with all ARDEX composite seals and is suitable for all load classes.
• impermeable to water and weatherproof
• highly tear-resistant and stretchable
• alkali resistant
• resistant to aggressive media

Color: white
Weight approx.: 180 g / m ²
Thickness: 0.32 mm
Width: 120 mm
Temperature resistance: -35 ° C to + 90 ° C
Folding bending test at -20 ° C: no cracks
Bursting pressure: 1.5 bar
Permissible motion recording: Max. 80% of the joint width
Packing: Carton with 1 roll of 50 m each; Carton with 1 roll each at 10 m
Storage: In cool, dry rooms approx. Can be stored for 24 months in the original closed container.