Highly flexible, water and frost-resistant, hydraulically setting, resin-tempered thin-bed adhesive with extended open time and increased resilience, C2TE S1, acc. EN 12004. For laying ceramic wall and floor tiles of all types and formats, mosaic, fine stone tiles and natural stone both indoors and outdoors. Suitable for use with possible thermal and static loads.
Highly flexible (S1)
For low absorbent substrates and coverings
Suitable for underfloor heating
Use a suitable bonding primer prior to bonding, Baumit Grund for absorbent substrates or Baumit SuperGrund for non-absorbent substrates.
Be the first to review “Baumit Baumacol FlexTop” Cancel reply
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Accessibility: (+20 °C): After sufficient hardening after approximately 12 hours
Capacity: ARDEX RG 12 1-6 is already accessible after a hardening period of 12 hours at temperatures of +18 °C to +20 °C and can be mechanically loaded.
ARDEX RG 12 1-6 is water-tight, frost-resistant and weather-tight after hardening.
Product Code: 1103 Barcode: 4024705242233 Suitable for External Use or Wet Areas: Yes, including swimming pools Pot Life: 60 minutes Fix Tiles After: 8 hours Colors Available: Grey Unit Size Available: 15kg Coverage: Approximately 6.25m2 with 2 coats applied per 15kg bag
Open Time: Up to 30 minutes Pot Life: Approx. 1 hour Adjustment Time: Approx. 15 – 20 minutes Time to Grout: 2 hours Color: Gray and White VOC: 0 Packaging: 40 lb. (18 kg) bag Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Shelf Life: 1 year, if unopened
Mixing Ratio:
5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume
Approximate Coverage per 40 lbs. (18 kg) bag:
1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)
Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Product Code: 1089 Barcode: 9006445046499 Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder Bulk weight: approx. 1.4 kg/l Fresh weight of the mortar: approx. 1.6 kg/l Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm Working time(at +20°C): approx. 4 hours Laying time: approx. 30 minutes Correction time: approx. 15–20 minutes Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible Grouting of walls (at +20°C): after approx. 8 hours underfloor heating suitability: yes Packaging: bags of 25 kg, net Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging
Reviews
There are no reviews yet.