Highly flexible, water and frost-resistant, hydraulically setting, resin-tempered thin-bed adhesive with extended open time and increased resilience, C2TE S1, acc. EN 12004. For laying ceramic wall and floor tiles of all types and formats, mosaic, fine stone tiles and natural stone both indoors and outdoors. Suitable for use with possible thermal and static loads.
Highly flexible (S1)
For low absorbent substrates and coverings
Suitable for underfloor heating
Use a suitable bonding primer prior to bonding, Baumit Grund for absorbent substrates or Baumit SuperGrund for non-absorbent substrates.
Be the first to review “Baumit Baumacol FlexTop” Cancel reply
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Accessibility: (+20 °C): After sufficient hardening after approximately 12 hours
Capacity: ARDEX RG 12 1-6 is already accessible after a hardening period of 12 hours at temperatures of +18 °C to +20 °C and can be mechanically loaded.
ARDEX RG 12 1-6 is water-tight, frost-resistant and weather-tight after hardening.
Product Code: 1089 Barcode: 9006445046499 Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder Bulk weight: approx. 1.4 kg/l Fresh weight of the mortar: approx. 1.6 kg/l Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm Working time(at +20°C): approx. 4 hours Laying time: approx. 30 minutes Correction time: approx. 15–20 minutes Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible Grouting of walls (at +20°C): after approx. 8 hours underfloor heating suitability: yes Packaging: bags of 25 kg, net Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging
Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
Plating on heating lines.
Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx. Component AComponent B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder Material requirement teeth ( mm ) Material requirements:
3 x 3 x 3 1.6 kg / m ²
6 x 6 x 6 2.4 kg / m ²
8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l Fresh weight approx.: 1.37 kg / l Processing time approx.: 60 minute ( n ) Insert time ( EN 1346 ) approx.: 15 minutes Correction time approx.: 30 minutes Accessibility after approx.: 3 hours, then grouting possible Application of environmental conditions: + 20 ° C Floor heating suitability: Yes Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate Packaging: Sacks with 25 kg net Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Product Code:
1167 Barcode:
9006445046352 Colors Available: Grey Unit Size Available: 20kg Suitable for External Use or Wet Areas
Yes, including swimming pools Suitable for Use with Under Tile Heating Yes Bed Thickness
1-6mm Pot Life
3 hours Open Time
60 minutes Adjustment Time 30 minutes Grout After 24 hours Coverage Approximately 5.6m2 at 3mm thick per 20kg bag
Product Code:
1002 Barcode:
9006445046345 Suitable for External Use or Wet Areas:
Yes, including swimming pools Suitable for Use with Under Tile Heating:
Yes Colours Available:
Grey & White Unit Size Available:
20kg & 10kg Bed Thickness:
1-6mm Pot Life:
3 hours Open Time:
60 minutes Adjustment Time: 30 minutes Grout After: Walls – 8 hours
Floors – 24 hours Coverage: Approximately 8m2 per 20kg bag using an 8mm x 8mm notch trowel
Reviews
There are no reviews yet.