Accessibility: (+20 °C): After sufficient hardening after approximately 12 hours
Capacity: ARDEX RG 12 1-6 is already accessible after a hardening period of 12 hours at temperatures of +18 °C to +20 °C and can be mechanically loaded.
ARDEX RG 12 1-6 is water-tight, frost-resistant and weather-tight after hardening.
Colour-stable and chemical-resistant jointing of ceramic tiles and plates as well as glass and porcelain mosaics
Information ARDEX RG 12
Colour-stable and chemical-resistant jointing of ceramic tiles and plates as well as glass and porcelain mosaics
Gluing of glass and porcelain mosaics on floor surfaces
Gluing of tiles and plates on floor surfaces
For joint widths of 1 to 6 mm
Very fine and smooth joint surface
Easy jointing and washing
High degree of filling
Chemical-resistant
Highly resilient
Be the first to review “Ardex RG12 1-6mm” Cancel reply
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Product Code:
1167 Barcode:
9006445046352 Colors Available: Grey Unit Size Available: 20kg Suitable for External Use or Wet Areas
Yes, including swimming pools Suitable for Use with Under Tile Heating Yes Bed Thickness
1-6mm Pot Life
3 hours Open Time
60 minutes Adjustment Time 30 minutes Grout After 24 hours Coverage Approximately 5.6m2 at 3mm thick per 20kg bag
Product Code: – Barcode: – Container: 12.5 kg paper sack Color: Brilliance white, Silver Grey, Cement Grey Mixing ratio: approx. 3.5 l water: 12.5 kg powder corresponding to
approx. 1 part water: 2.75 part powder Bulk weight: approx. 1.3 kg / l fresh weight of the mortar: approx. 2.1 kg / l material requirement : with joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic.
von 60 x 60 cm ca. 0,10 kg/m²
from 60 x 30 cm approx. 0.15 kg / m 2
von 30 x 30 cm ca. 0,20 kg/m²
von 15 x 15 cm ca. 0,35 kg/m²
from 10 x 10 cm approx. 0.50 kg / m 2
from 5 x 5 cm approx. 1.00 kg / m 2
The additional losses due to excess material on the tiles amount to 0.05-0.10 kg / m 2 , depending on their surface properties and method of operation .
Processing time (+20 ° C): approx. 90 minutes Accessibility (+20 ° C): after approx. 4 hours ball indentation hardness:
after 1 day approx. 40 N / mm 2
after 3 days approx. 60 N / mm 2
after 7 days approx. 80 N / mm 2
after 28 days approx. 90 N / mm 2 suitability for underfloor heating: yes Labeling according to GHS / CLP: see safety data sheet Labeling according to ADR: see safety data sheet Packing: bag with 12.5 kg net Storage: in dry rooms approx. Can be stored for 12 months in the originally sealed container.
Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
Plating on heating lines.
Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx. Component AComponent B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder Material requirement teeth ( mm ) Material requirements:
3 x 3 x 3 1.6 kg / m ²
6 x 6 x 6 2.4 kg / m ²
8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l Fresh weight approx.: 1.37 kg / l Processing time approx.: 60 minute ( n ) Insert time ( EN 1346 ) approx.: 15 minutes Correction time approx.: 30 minutes Accessibility after approx.: 3 hours, then grouting possible Application of environmental conditions: + 20 ° C Floor heating suitability: Yes Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate Packaging: Sacks with 25 kg net Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Product Code: 1089 Barcode: 9006445046499 Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder Bulk weight: approx. 1.4 kg/l Fresh weight of the mortar: approx. 1.6 kg/l Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm Working time(at +20°C): approx. 4 hours Laying time: approx. 30 minutes Correction time: approx. 15–20 minutes Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible Grouting of walls (at +20°C): after approx. 8 hours underfloor heating suitability: yes Packaging: bags of 25 kg, net Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging
Reviews
There are no reviews yet.