Ardex RF

PRODUCT CODE: 2954
SIZE: 30 x 90 x 8mm RC
SERIES: Princess
TYPE: White Body
FINISH: Semi Glossy
THICKNESS: 8 mm
WEIGHT PER BOX: 19.25 kg
COLOR: White
QUANTITY FOR BOX: 1.35 m2 (5 pcs)
BOXES FOR PALLETS: 54 (72.9 m2)

PRODUCT CODE: 4688
SIZE: 60 x 119.7 x 9mm
SERIES: Jewels
CODE: 15
STYLE: Classic
THICKNESS: 9mm
WEIGHT PER BOX: 29,14kg
EFFECT: Marble
SURFACE: Glossy
QUANTITY FOR BOX: 1.44 m2
BOXES FOR PALLETS: 15

• Compensate and repair stairs and platforms.
• Filling holes, depressions and eruptions in screeds and concrete floors.
• Sample of height offsets and bumps on all suitable substrates.
• For indoor use, floor.

Ready to install after approx.: 1 hour

Mixing ratio approx.: 

      Component A        Component B

• 3.4 – 4 l water       12.5 kg powder
• 1 RT water              2.5 RT powder

Material requirements: 1.25 kg powder per m ² and mm
Bulk weight approx.: 1.30 kg / l
Fresh weight approx.: 1.70 kg / l
Processing time approx.: 15 minute ( n )
Accessibility after approx.: 1 hour ( n )
Application of environmental conditions: + 20 ° C
Bending tensile strength approx. time:

• 5.0 N / mm ² – after 1 day
• 6.0 N / mm ² – after 7 days
• 7.0 N / mm ² – after 28 days

Compressive strength of approx. time:

• 21 N / mm ² – after 1 day
• 29 N / mm ² – after 7 days
• 35 N / mm ² – after 28 days

Floor heating suitability: Yes
Chair roll suitability: Yes
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

Product Code: 1159
Barcode: 404705611121
Usage:

• Sealing tape for flexible and impermeable bridging of movement joints, edge joints as well as crack-prone connections and penetrations.
• The ARDEX TRICOM sealing set includes ribbons, corners and cuffs. It can be used in conjunction with all ARDEX composite seals and is suitable for all load classes.
• impermeable to water and weatherproof
• highly tear-resistant and stretchable
• alkali resistant
• resistant to aggressive media

Color: white
Weight approx.: 180 g / m ²
Thickness: 0.32 mm
Width: 120 mm
Temperature resistance: -35 ° C to + 90 ° C
Folding bending test at -20 ° C: no cracks
Bursting pressure: 1.5 bar
Permissible motion recording: Max. 80% of the joint width
Packing: Carton with 1 roll of 50 m each; Carton with 1 roll each at 10 m
Storage: In cool, dry rooms approx. Can be stored for 24 months in the original closed container.

Code: –
Barcode: –
Material basis:   Silicone, acetic acid hardening
Components:   1-component
Consistency:   pasty
Specific weight DIN 52451:   approx. 1.0 g / cm³
Joint width : up to 30 mm
Processing   temperature : +5 ° C to +40 ° C (substrate temperature)

Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable
Hardening speed *: approx. 2 mm / day – approx. 7 mm / week
Temperature resistance:   -40 ° C to +180 ° C
Practical elasticity:   approx. 25% of the joint width
E -Module 100%:   approx. 0.40 N / mm² (DIN EN 28339 method A)
Shore A hardness: that. 25

Consumption: 
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.

* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed.
Labeling according to GHS / CLP : see safety data sheet 
Labeling according to ADR: see safety
data sheet Packing:   Cartridge with 310 ml net, packed in 12 and 20 pieces
Storage: Can be stored   in cool and dry rooms for approx. 24 months in the originally closed container