Code: – Barcode: – Material basis: Silicone, acetic acid hardening Components: 1-component Consistency: pasty Specific weight DIN 52451: approx. 1.0 g / cm³ Joint width : up to 30 mm Processing temperature : +5 ° C to +40 ° C (substrate temperature)
Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable Hardening speed *: approx. 2 mm / day – approx. 7 mm / week Temperature resistance: -40 ° C to +180 ° C Practical elasticity: approx. 25% of the joint width E -Module 100%: approx. 0.40 N / mm² (DIN EN 28339 method A) Shore A hardness: that. 25
Consumption:
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.
* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed. Labeling according to GHS / CLP : see safety data sheet Labeling according to ADR: see safety data sheet Packing: Cartridge with 310 ml net, packed in 12 and 20 pieces Storage: Can be stored in cool and dry rooms for approx. 24 months in the originally closed container
Be the first to review “ARDEX SE Silicon” Cancel reply
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
For repairing cracks, holes and concrete, plaster and lightweight walls.
shrink-free, up to 12 mm single layer thickness
can be painted over
flexible
solvent free
grindable
Packing: 310 ml cartridge Storage: In dry rooms approx. Can be stored for 12 months in the original closed container. Density: 0.57 g / cm ³ Grain: < 0.2 mm Processing temperature: + 5 ° C to + 35 ° C Temperature load: -25 ° C to + 80 ° C Skin formation time approx.: 5 minute ( n )
Reviews
There are no reviews yet.