Highly flexible, water and frost-resistant, hydraulically setting, resin-tempered thin-bed adhesive with extended open time and increased resilience, C2TE S1, acc. EN 12004. For laying ceramic wall and floor tiles of all types and formats, mosaic, fine stone tiles and natural stone both indoors and outdoors. Suitable for use with possible thermal and static loads.
Highly flexible (S1)
For low absorbent substrates and coverings
Suitable for underfloor heating
Use a suitable bonding primer prior to bonding, Baumit Grund for absorbent substrates or Baumit SuperGrund for non-absorbent substrates.
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Accessibility: (+20 °C): After sufficient hardening after approximately 12 hours
Capacity: ARDEX RG 12 1-6 is already accessible after a hardening period of 12 hours at temperatures of +18 °C to +20 °C and can be mechanically loaded.
ARDEX RG 12 1-6 is water-tight, frost-resistant and weather-tight after hardening.
Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
Plating on heating lines.
Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx. Component AComponent B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder Material requirement teeth ( mm ) Material requirements:
3 x 3 x 3 1.6 kg / m ²
6 x 6 x 6 2.4 kg / m ²
8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l Fresh weight approx.: 1.37 kg / l Processing time approx.: 60 minute ( n ) Insert time ( EN 1346 ) approx.: 15 minutes Correction time approx.: 30 minutes Accessibility after approx.: 3 hours, then grouting possible Application of environmental conditions: + 20 ° C Floor heating suitability: Yes Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate Packaging: Sacks with 25 kg net Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Product Code: 1103 Barcode: 4024705242233 Suitable for External Use or Wet Areas: Yes, including swimming pools Pot Life: 60 minutes Fix Tiles After: 8 hours Colors Available: Grey Unit Size Available: 15kg Coverage: Approximately 6.25m2 with 2 coats applied per 15kg bag
Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Open Time: Up to 30 minutes Pot Life: Approx. 1 hour Adjustment Time: Approx. 15 – 20 minutes Time to Grout: 2 hours Color: Gray and White VOC: 0 Packaging: 40 lb. (18 kg) bag Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Shelf Life: 1 year, if unopened
Mixing Ratio:
5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume
Approximate Coverage per 40 lbs. (18 kg) bag:
1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)
