Ardex CA 20

• Code: 2494
• Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Product Code: 1089
Barcode: 9006445046499
Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder
Bulk weight: approx. 1.4 kg/l
Fresh weight of the mortar: approx. 1.6 kg/l
Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm
Working time (at +20°C): approx. 4 hours
Laying time: approx. 30 minutes
Correction time: approx. 15–20 minutes
Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible
Grouting of walls (at +20°C): after approx. 8 hours
underfloor heating suitability: yes
Packaging: bags of 25 kg, net
Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging

Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

Product Code: –

Barcode: –

Open Time: Up to 30 minutes
Pot Life: Approx. 1 hour
Adjustment Time: Approx. 15 – 20 minutes
Time to Grout: 2 hours
Color: Gray and White
VOC: 0
Packaging: 40 lb. (18 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened

Mixing Ratio:

5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume

Approximate Coverage per 40 lbs. (18 kg) bag:

1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)

Product Code:
1167
Barcode:
9006445046352
Colors Available: Grey
Unit Size Available: 20kg
Suitable for External Use or Wet Areas
Yes, including swimming pools
Suitable for Use with Under Tile Heating
Yes
Bed Thickness
1-6mm
Pot Life
3 hours
Open Time
60 minutes
Adjustment Time
30 minutes
Grout After
24 hours
Coverage
Approximately 5.6m² at 3mm thick per 20kg bag