Ardex X78

Product Code: –

Barcode: –

Open Time: Up to 30 minutes
Pot Life: Approx. 1 hour
Adjustment Time: Approx. 15 – 20 minutes
Time to Grout: 2 hours
Color: Gray and White
VOC: 0
Packaging: 40 lb. (18 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened

Mixing Ratio:

5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume

Approximate Coverage per 40 lbs. (18 kg) bag:

1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)

Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)