FINISH PLASTER
- Suitable for stucco in grades Q1 to Q4
- Also tear-free in thick layers
- Very economical to use
- Can be processed continuously up to 0 mm
Ardex A826
4,180.00ден
Use: On plaster plastic base For smoothing and filling walls and ceilings.
This wall equalization is the ideal product for making flat, smooth and stress-free walls and ceilings.
Article No.: 1059
Barcode: 9006445040114
Packing: Bucket with 25 kg net
pH value: approximately 8.00
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
- Bags with 25.00 kg net
- 40 VPE / pallet
Printing strength: after 28 days approximately 8.00 N / mm ²
Bending strength: after 28 days approximately 4.00 N / mm ²
410.00ден
Article No.: 1934
Barcode: 3800866001640
Water vapour permeability: ≤ 15
Max. thickness: 25 per coat (on a new substrate)
Mortar group: CS II
407.00ден
Article No.: 1171
Barcode: 9006445040114
Use:
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
4,170.00ден
Article No.: –
Barcode: 9006445040077
Packaging: net 25 kg sacks
Use:
- Cement-based
- For smoothing and filling cavities
- Water- and weatherproof
Compressive strength:
- after 7 days, approx. 8 N/mm²
- after 28 days, approx. 10 N/mm²
Bending tensile strength:
- after 7 days, approx. 3 N/mm²
- after 28 days, approx. 5 N/mm²
Mixing ratio: approx. 8.5 l water : 25 kg powder corresponding to approx. 1 RT water : 2 ¾ RT powder
Bulk weight: approx. 1.1 kg/l
Fresh weight of mortar: approx. 1.7 kg/l
Material requirements: approx. 1.2 kg powder per m² and mm
Working time (+20°C): approx. 45 minutes
pH value: approx. 12
Corrosion behaviour: contains no components that have a corrosive effect on steel Identification as per GHS/CLP: GHS05 “corrosive”,
Signal word: danger Identification as per ADR: none
Storage: can be stored in a dry space in the originally sealed container for approximately 12 months
2,950.00ден
Article No.: 1924
Barcode: –
Packaging: 20 kg bucket
Amount of packaging on pallet: 24
PH value: app. 0.8
Consumption: app. 0.4 kg/m²
Yield: app. 50 m²/bucket
530.00ден
Article No.: 1873
Barcode: 8606104246133
Packing: 20 kg bag
Number of packages on a pallet: 60
Diffusion resistance factor μ: <15
Bulk density: approx. 1200 kg / m2
Max. thickness: 3 mm (optimal thickness 2-3 mm)
Min. thickness: 1 mm
Processing time: approx. 8 h (depending on climatic conditions)
Consumption: approx. 1.2 kg / m2 / mm
Yield: approx. 16.7 m² / mm / bag
Water consumption: approx. 8 l / bag
Thermal conductivity coefficient: approx. 0.4 W / (mK)
Grain size: approx. 0.1 mm
Packing: 20 kg, 1 pallet = 60 bags = 1,200 kg
2,299.00ден
Article No.: 1165
Barcode: 9006445046277
Packaging: 12.5 KG PAPER BAG
Usage:
- Compensate and repair stairs and platforms.
- Filling holes, depressions and eruptions in screeds and concrete floors.
- Sample of height offsets and bumps on all suitable substrates.
- For indoor use, floor.
Ready to install after approx.: 1 hour
Mixing ratio approx.:
Component A Component B
- 3.4 – 4 l water 12.5 kg powder
- 1 RT water 2.5 RT powder
Material requirements: 1.25 kg powder per m ² and mm
Bulk weight approx.: 1.30 kg / l
Fresh weight approx.: 1.70 kg / l
Processing time approx.: 15 minute ( n )
Accessibility after approx.: 1 hour ( n )
Application of environmental conditions: + 20 ° C
Bending tensile strength approx. time:
- 5.0 N / mm ² – after 1 day
- 6.0 N / mm ² – after 7 days
- 7.0 N / mm ² – after 28 days
Compressive strength of approx. time:
- 21 N / mm ² – after 1 day
- 29 N / mm ² – after 7 days
- 35 N / mm ² – after 28 days
Floor heating suitability: Yes
Chair roll suitability: Yes
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
1,534.00ден
Article No.: 1941
Barcode: 8606104246416
Packaging: 15 l Bucket
Quantity of packaging on the pallet: 24
Consumption: about 0.2 l / m² for one coating
Yield: about 75 m² / Bucket
Density: about 1.65 kg / dm³
4,870.00ден
Article No.: 3474
Barcode: 9006445047649
Packaging: 25 kg paper bag
Use:
- Cement-based
- Indoor and outdoor, wall and floor
- Long cement-based smoothing and fine-repair mortar, gray
Mixing ratio: approx. 6.25 – 6.75 l of water: 25 kg of powder accordingly approx. 1 RT water: 2 ¾ RT powder
Volumetric weight: approx. 1.6 kg/l
Weight of fresh mortar: approx. 1.7 kg/l
Bulk weight: approx. 1.1 kg/l
Material requirements: approx. 1.4 kg of dust / m2/mm
Processing time (+20°C): approx. 4 o’clock
Compressive strength:
- after 7 days approx. 8 N/mm2
- After 28 days approx. 18 N/mm²
Flexural strength:
- after 7 days approx. 3 N/mm2
- After 28 days approx. 5 N/mm²
pH value: approx. 12
Corrosion effect: Does not contain corrosion corrosion causative ingredients
Storage: In dry rooms, originally closed packaging
760.00ден
Article No.: 1932
Barcode: 3800866001350
Package: 30 kg bag
Water vapor permeability: approx. 10
Compressive strength: > 2 N / mm²
Density of the dry mixture: approx. 950 kg / m2
Maximum thickness: 25 mm on one hand
Minimum thickness: 10 mm on the wall, 8 mm on the ceiling
Tensile strength in bending: > 1 N / mm²
Consumption: approx. 8 kg / m2 / cm
Coverage: approx. 3.7 m² / bag at 10 mm plaster thickness
Grain size: 0.6 mm
Pallet: 1 pallet = 45 bags = 1,350 kg
0.00ден
Article No.:
Barcode: 9004329250949
Packaging: 25 kg bucket
Amount of packaging on pallet: 24
Water vapour permeability: app. 35 – 40
SD value: 0.07 – 0.08 m for a layer thickness of 2 mm
W value: < 0.1 kg/(m².h^[0,5])
Gross density: app. 1.8 kg/m²
Consumption: app. 2.9 – 4.2 kg/m²
Yield: app. 8.6 – 8.5 m²/bucket
Max. grain size: 1 mm
4,049.00ден
Article No.: –
Barcode: 4024705325547
Packing: Bucket with 18 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Material requirements approx.: 1.2 kg per m ² and mm
Consumption: Execution level:
0.2 kg / m ² 1
0.1 kg / m ² 2 based on 1
0.2 kg / m ² 3 based on 2
1.2 kg / m ² 4, full-surface filling per mm
Fresh weight approx.: 1.20 kg / l
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
770.00ден / kg
Article No.: 1801
Barcode: 4024705306614
Use:
- optimised formula
- easier mixing
- longer processing time
Product specification
- For the design of interior wall and ceiling surfaces
- Cement-Plastic-Base
- Cures and dries quickly, without tension and cracks in all layer thicknesses
- Easy to process
- Excellent adhesion
- Very economical
Range of application
Creation of representative, creatively designed visible surfaces, e.g. in exhibition rooms, foyers, public buildings, sales rooms and in private living areas.
Reviews
There are no reviews yet.