CARTRIDGE BOX
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Categories: Acryl, Building Materials, Silicon, Wall Fillers
Tags: Acryl, Fillers, Wall
Brand: Ardex
Ardex RF
407.00ден
Article No.: 1171
Barcode: 9006445040114
Use:
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
1,150.00ден / sq m
PRODUCT CODE: 5196
SIZE: 30 x 90 x 10.6mm RC
SERIES: Elite
TYPE: White Body
FINISH: Matt
THICKNESS: 10.6 mm
WEIGHT PER BOX: 18.5 kg
COLOR: Sand
QUANTITY FOR BOX: 1.08 m2 (4 pcs)
BOXES FOR PALLETS: 51 (55.08 m2)
KG / PALLET: 943.5 kg
2,200.00ден / sq m
PRODUCT CODE: 5113
SIZE: 29.5 x 90 x mm RC
SERIES: Tactile
TYPE: White Body
FINISH: Matt
THICKNESS: – mm
WEIGHT PER BOX: 18 kg
COLOR: Ivory
QUANTITY FOR BOX: – m2 (4 pcs)
BOXES FOR PALLETS: – (- m2)
KG / PALLET: – kg
990.00ден
Code: –
Barcode: –
Material basis: Silicone, acetic acid hardening
Components: 1-component
Consistency: pasty
Specific weight DIN 52451: approx. 1.0 g / cm³
Joint width : up to 30 mm
Processing temperature : +5 ° C to +40 ° C (substrate temperature)
Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable
Hardening speed *: approx. 2 mm / day – approx. 7 mm / week
Temperature resistance: -40 ° C to +180 ° C
Practical elasticity: approx. 25% of the joint width
E -Module 100%: approx. 0.40 N / mm² (DIN EN 28339 method A)
Shore A hardness: that. 25
Consumption:
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.
* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed.
Labeling according to GHS / CLP : see safety data sheet
Labeling according to ADR: see safety
data sheet Packing: Cartridge with 310 ml net, packed in 12 and 20 pieces
Storage: Can be stored in cool and dry rooms for approx. 24 months in the originally closed container
770.00ден / kg
Article No.: 1801
Barcode: 4024705306614
Use:
- optimised formula
- easier mixing
- longer processing time
Product specification
- For the design of interior wall and ceiling surfaces
- Cement-Plastic-Base
- Cures and dries quickly, without tension and cracks in all layer thicknesses
- Easy to process
- Excellent adhesion
- Very economical
Range of application
Creation of representative, creatively designed visible surfaces, e.g. in exhibition rooms, foyers, public buildings, sales rooms and in private living areas.
4,049.00ден
Article No.: –
Barcode: 4024705325547
Packing: Bucket with 18 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Material requirements approx.: 1.2 kg per m ² and mm
Consumption: Execution level:
0.2 kg / m ² 1
0.1 kg / m ² 2 based on 1
0.2 kg / m ² 3 based on 2
1.2 kg / m ² 4, full-surface filling per mm
Fresh weight approx.: 1.20 kg / l
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
1,350.00ден / sq m
PRODUCT CODE: 4688
SIZE: 60 x 119.7 x 9mm
SERIES: Jewels
CODE: 15
STYLE: Classic
THICKNESS: 9mm
WEIGHT PER BOX: 29,14kg
EFFECT: Marble
SURFACE: Glossy
QUANTITY FOR BOX: 1.44 m2
BOXES FOR PALLETS: 15
2,299.00ден
Article No.: 1165
Barcode: 9006445046277
Packaging: 12.5 KG PAPER BAG
Usage:
- Compensate and repair stairs and platforms.
- Filling holes, depressions and eruptions in screeds and concrete floors.
- Sample of height offsets and bumps on all suitable substrates.
- For indoor use, floor.
Ready to install after approx.: 1 hour
Mixing ratio approx.:
Component A Component B
- 3.4 – 4 l water 12.5 kg powder
- 1 RT water 2.5 RT powder
Material requirements: 1.25 kg powder per m ² and mm
Bulk weight approx.: 1.30 kg / l
Fresh weight approx.: 1.70 kg / l
Processing time approx.: 15 minute ( n )
Accessibility after approx.: 1 hour ( n )
Application of environmental conditions: + 20 ° C
Bending tensile strength approx. time:
- 5.0 N / mm ² – after 1 day
- 6.0 N / mm ² – after 7 days
- 7.0 N / mm ² – after 28 days
Compressive strength of approx. time:
- 21 N / mm ² – after 1 day
- 29 N / mm ² – after 7 days
- 35 N / mm ² – after 28 days
Floor heating suitability: Yes
Chair roll suitability: Yes
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
2,950.00ден
Article No.: 1924
Barcode: –
Packaging: 20 kg bucket
Amount of packaging on pallet: 24
PH value: app. 0.8
Consumption: app. 0.4 kg/m²
Yield: app. 50 m²/bucket
Price range: 1,000.00ден through 1,100.00ден / sq m
Price range: 753.00ден through 1,100.00ден / sq m
990.00ден
Code: –
Barcode: –
Suitable for External Use or Wet Areas
Yes
Not suitable for swimming pools
Suitable for Use with Under Tile Heating
Yes
Skin Forming Time
5 minutes
Coverage
Approximately 9m per 310ml cartridge with a 6x6mm bead
4,180.00ден
Use: On plaster plastic base For smoothing and filling walls and ceilings.
This wall equalization is the ideal product for making flat, smooth and stress-free walls and ceilings.
Article No.: 1059
Barcode: 9006445040114
Packing: Bucket with 25 kg net
pH value: approximately 8.00
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
- Bags with 25.00 kg net
- 40 VPE / pallet
Printing strength: after 28 days approximately 8.00 N / mm ²
Bending strength: after 28 days approximately 4.00 N / mm ²