Product Code: –
Barcode: –
Container: 12.5 kg paper sack
Color: Brilliance white, Silver Grey, Cement Grey
Mixing ratio: approx. 3.5 l water: 12.5 kg powder corresponding to
approx. 1 part water: 2.75 part powder
Bulk weight: approx. 1.3 kg / l
fresh weight of the mortar: approx. 2.1 kg / l
material requirement : with joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic.
| von 60 x 60 cm ca. 0,10 kg/m² | from 60 x 30 cm approx. 0.15 kg / m 2 |
| von 30 x 30 cm ca. 0,20 kg/m² | von 15 x 15 cm ca. 0,35 kg/m² |
| from 10 x 10 cm approx. 0.50 kg / m 2 | from 5 x 5 cm approx. 1.00 kg / m 2 |
The additional losses due to excess material on the tiles amount to 0.05-0.10 kg / m 2 , depending on their surface properties and method of operation .
Processing time (+20 ° C): approx. 90 minutes
Accessibility (+20 ° C): after approx. 4 hours
ball indentation hardness:
after 1 day approx. 40 N / mm 2
after 3 days approx. 60 N / mm 2
after 7 days approx. 80 N / mm 2
after 28 days approx. 90 N / mm 2 suitability for
underfloor heating: yes
Labeling according to GHS / CLP: see safety data sheet
Labeling according to ADR: see safety
data sheet Packing: bag with 12.5 kg net
Storage: in dry rooms approx. Can be stored for 12 months in the originally sealed container.
Use:
Inside and outside. Floor and wall.
For grouting
- Tiles made of earthenware, stoneware and porcelain stoneware
- Natural and concrete slabs ( insensitive to moisture )
- Fission and clinker plates
- Facade strap
- Blending and visible masonry
- Glass blocks.
For joint widths of 2 – 15 mm.
Colours: gray
Mixing ratio approx.
Component A Component B
2.5 l water 12.5 kg powder
1 RT water 3.4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm Width in cm Consumption
60 60 0.20 kg / m ²
30 60 0.30 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.50 kg / l
Fresh weight approx.: 2.20 kg / l
Processing time approx.: 90 minute ( n )
Accessibility after approx.: 5 hours ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness time
60 N / mm ² after 1 day
80 N / mm ² after 3 days
100 N / mm ² after 7 days
120 N / mm ² after 28 days
Floor heating suitability: Yes
Tested according to DIN EN 13888: CG2 A
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Use:
Flex joint mortar for wide joints. Indoor and outdoor, on the wall and floor.
ARDEX G 7 FLEX 2-15 is particularly suitable for wide joints and large areas. The high deformability and good flank adhesion reduce stress on thermally stressed surfaces and contribute significantly to the safety of the coverings. After hardening, ARDEX G 7 FLEX has 2-15 water and dirt repellent properties, which ensure a long-lasting beautiful look and thus maintain the value of the coverings. ARDEX G 7 FLEX 2-15 is easy to process, has a high filling power and does not burn up. The area of application includes joints of tiles made of earthenware, stoneware and porcelain stoneware, split and clinker plates as well as non-humid sensitive natural and concrete stone slabs on the wall and floor, indoors and outdoors.ARDEX G 7 FLEX 2-15 meets the requirements CG2 WA according to EN 13888 and is very low in emissions – EC 1 PLUS – according to GEV EMICODE.
PRODUCT HIGHLIGHTS:
- cement-bound flex grout
- ideal for large areas
- highly deformable
- good flank adhesion
- water and dirt repellent
- high strength
- suitable for floor and wall heating
Colours: Gray, Zement grey, Silbergray, Basalt
Mixing ratio approx.
Component A Component B
2.4 l water 12.5 kg powder
1 RT water 4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm Width in cm Consumption
60 60 0.30 kg / m ²
30 60 0.40 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.40 kg / l
Fresh weight approx.: 2.10 kg / l
Processing time approx.:45 minute ( n )
Accessibility after approx.:90 minute ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness time
40 N / mm ² after 1 day
50 N / mm ² after 3 days
60 N / mm ² after 7 days
70 N / mm ² after 28 days
Floor heating suitability: Yes
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder
Bulk
weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l
material requirements: at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .
| for 60 x 60 cm ca. 0,10 kg/m² | for 30 x 60 cm ca. 0,15 kg/m² |
| for 30 x 30 cm ca. 0,20 kg/m² | for 15 x 15 cm ca. 0,35 kg/m² |
| for 10 x 10 cm ca. 0,50 kg/m² | for 5 x 5 cm ca. 1,00 kg/m² |
The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method.
Processing time (+20 ° C): approx. 30 minutes
Accessibility (+20 ° C): after approx. 90 minutes
Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm²
floor heating suitability: yes
labeling according to GHS / CLP: see safety
labeling ADR: see safety
packaging: bag with 5 kg of net packed into 4 pieces
storage: Can be stored in dry rooms for approx. 12 months in the originally closed container
Product Code: –
Barcode: 9006445044570
Usage:
- For inside and outside, wall and floor.
- Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
- Plating on heating lines.
- Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
- For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx.
Component A Component B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder
Material requirement teeth ( mm ) Material requirements:
-
- 3 x 3 x 3 1.6 kg / m ²
- 6 x 6 x 6 2.4 kg / m ²
- 8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Material Requirements: approximately 100-500 g / m² depending on the surface texture and the used tool
drying time (+20 ° C): up to 60 minutes
floor heating suitability: yes
Kennzeichnungnach GHS / CLP: see safety
Labeling ADR: see safety
GISCODE: D1
Packing: Bucket with 2 kg and 8 kg net
Storage: Can be stored frost-free for approx. 12 months in the original sealed container. Store upright.
Material requirements:
- Mixing ratio: undiluted approx. 300 g ARDEX P 51 / m²
- Mixing ratio: 1 part ARDEX P 51: ½ part water approx. 200 g ARDEX P 51 / m²
- Mixing ratio: 1 part ARDEX P 51: 1 part water approx. 150 g ARDEX P 51 / m²
- Mixing ratio: 1 part ARDEX P 51: 3 parts water approx. 50 g ARDEX P 51 / m²
- Mixing ratio: 1 part ARDEX P 51: 5 parts water approx. 30 g ARDEX P 51 / m²
Code: 1048
Barcode: 9006445040282
GISCODE: D1
Labeling according to GHS / CLP: see safety
Labeling according to ADR: see safety
Data Sheet Packing: Canisters with 5 kg and 25 kg net bottles with 1 kg net,
Storage: Can be stored frost-free for approx. 12 months in the original, closed container. Store upright.
- optimised formula
- easier mixing
- longer processing time
Product specification
- For the design of interior wall and ceiling surfaces
- Cement-Plastic-Base
- Cures and dries quickly, without tension and cracks in all layer thicknesses
- Easy to process
- Excellent adhesion
- Very economical
Range of application
Creation of representative, creatively designed visible surfaces, e.g. in exhibition rooms, foyers, public buildings, sales rooms and in private living areas.
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
ARDEX RG 12 1-6 is water-tight, frost-resistant and weather-tight after hardening.
Product Code: 1008 & 1009
Barcode: 4024705571760 & 4024705571692
Package: 20kg & 4kg
One-Component Waterproofing and Crack Isolation Membrane
Flexible, topside waterproofing for interior floors and walls
Crack isolation up to 1/8″ (3 mm)
Highly workable consistency; minimal drips and splatters
Working Time: Unlimited. Seal unused portion to prevent product from drying out.
Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours
Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).
Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4).
Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
Shelf Life: 12 months
Product Code: 1103
Barcode: 4024705242233
Suitable for External Use or Wet Areas: Yes, including swimming pools
Pot Life: 60 minutes
Fix Tiles After: 8 hours
Colors Available: Grey
Unit Size Available: 15kg
Coverage: Approximately 6.25m2 with 2 coats applied per 15kg bag
Code: –
Barcode: –
Material basis: Silicone, acetic acid hardening
Components: 1-component
Consistency: pasty
Specific weight DIN 52451: approx. 1.0 g / cm³
Joint width : up to 30 mm
Processing temperature : +5 ° C to +40 ° C (substrate temperature)
Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable
Hardening speed *: approx. 2 mm / day – approx. 7 mm / week
Temperature resistance: -40 ° C to +180 ° C
Practical elasticity: approx. 25% of the joint width
E -Module 100%: approx. 0.40 N / mm² (DIN EN 28339 method A)
Shore A hardness: that. 25
Consumption:
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.
* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed.
Labeling according to GHS / CLP : see safety data sheet
Labeling according to ADR: see safety
data sheet Packing: Cartridge with 310 ml net, packed in 12 and 20 pieces
Storage: Can be stored in cool and dry rooms for approx. 24 months in the originally closed container
Product Code: 1160 & 2090 (10ml)
Barcode: 4024705702935 & 4024705702928 (10ml)
Color: White with grey drop pattern
Membrane width: approx. 1.0 m
Fracture strain lengthwise: 82.5 % at 99.8 N/15 mm
Fracture strain crosswise: 73.7 % at 46.5 N/15 mm
Total thickness: 0.51 mm
Total weight: 315 g/m²
Burst load: 3.0 bar
Crack bridging: > 0,4 mm
Adhesive tensile strength: > 0,2 N / mm2
SD value: > 85 m
UV resistance: < 500 hours
Identification as per GHS/CLP: none
Identification as per ADR: none
Packaging: carton with 1 roll each
Roll length: 30 m or 10 m
Storage and shelf life: in a cool, dry space. in original packaging, approx. 24 months