Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

Material Requirements: approximately 100-500 g / m² depending on the surface texture and the used tool
drying time (+20 ° C): up to 60 minutes
floor heating suitability: yes
Kennzeichnungnach GHS / CLP: see safety
Labeling ADR: see safety
GISCODE: D1
Packing: Bucket with 2 kg and 8 kg net
Storage: Can be stored frost-free for approx. 12 months in the original sealed container. Store upright.

Material requirements:

• Mixing ratio: undiluted approx. 300 g ARDEX P 51 / m²
• Mixing ratio: 1 part ARDEX P 51: ½ part water approx. 200 g ARDEX P 51 / m²
• Mixing ratio: 1 part ARDEX P 51: 1 part water approx. 150 g ARDEX P 51 / m²
• Mixing ratio: 1 part ARDEX P 51: 3 parts water approx. 50 g ARDEX P 51 / m²
• Mixing ratio: 1 part ARDEX P 51: 5 parts water approx. 30 g ARDEX P 51 / m²

Code: 1048
Barcode: 9006445040282
GISCODE: D1
Labeling according to GHS / CLP: see safety
Labeling according to ADR: see safety
Data Sheet Packing: Canisters with 5 kg and 25 kg net bottles with 1 kg net,
Storage: Can be stored frost-free for approx. 12 months in the original, closed container. Store upright.

Product Code: 1008 & 1009

Barcode: 4024705571760 & 4024705571692

Package: 20kg & 4kg

One-Component Waterproofing and Crack Isolation Membrane

Flexible, topside waterproofing for interior floors and walls

Crack isolation up to 1/8″ (3 mm)

Highly workable consistency; minimal drips and splatters

Working Time: Unlimited. Seal unused portion to prevent product from drying out.
Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours

Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).

Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4).
Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
Shelf Life: 12 months

Product Code: 1103
Barcode: 4024705242233
Suitable for External Use or Wet Areas: Yes, including swimming pools
Pot Life: 60 minutes
Fix Tiles After: 8 hours
Colors Available: Grey
Unit Size Available: 15kg
Coverage: Approximately 6.25m² with 2 coats applied per 15kg bag

Code: –
Barcode: –
Material basis:   Silicone, acetic acid hardening
Components:   1-component
Consistency:   pasty
Specific weight DIN 52451:   approx. 1.0 g / cm³
Joint width : up to 30 mm
Processing   temperature : +5 ° C to +40 ° C (substrate temperature)

Skin-forming time: approx 10–12 minutes, after a few hours the skin is severely vulnerable
Hardening speed *: approx. 2 mm / day – approx. 7 mm / week
Temperature resistance:   -40 ° C to +180 ° C
Practical elasticity:   approx. 25% of the joint width
E -Module 100%:   approx. 0.40 N / mm² (DIN EN 28339 method A)
Shore A hardness: that. 25

Consumption: 
10 x 10 mm joint approx. 3.0 running meters, per cartridge
5 x 5 mm joint approx. 12.0 running meters, per cartridge
With triangular joints, the consumption is reduced to half the amount.

* At +23 ° C and 50% relative humidity. Higher temperatures and / or higher air humidity shorten the hardening time and increase the hardening speed, lower temperatures and / or lower air humidity extend the hardening time and reduce the hardening speed.
Labeling according to GHS / CLP : see safety data sheet 
Labeling according to ADR: see safety
data sheet Packing:   Cartridge with 310 ml net, packed in 12 and 20 pieces
Storage: Can be stored   in cool and dry rooms for approx. 24 months in the originally closed container

Product Code: 1160 & 2090 (10ml)
Barcode: 4024705702935 & 4024705702928 (10ml)
Color: White with grey drop pattern
Membrane width: approx. 1.0 m
Fracture strain lengthwise: 82.5 % at 99.8 N/15 mm
Fracture strain crosswise: 73.7 % at 46.5 N/15 mm
Total thickness: 0.51 mm
Total weight: 315 g/m²
Burst load: 3.0 bar
Crack bridging: > 0,4 mm
Adhesive tensile strength: > 0,2 N / mm2
SD value: > 85 m
UV resistance: < 500 hours
Identification as per GHS/CLP: none
Identification as per ADR: none
Packaging: carton with 1 roll each
Roll length: 30 m or 10 m
Storage and shelf life: in a cool, dry space. in original packaging, approx. 24 months

Product Code: 1159
Barcode: 404705611121
Usage:

• Sealing tape for flexible and impermeable bridging of movement joints, edge joints as well as crack-prone connections and penetrations.
• The ARDEX TRICOM sealing set includes ribbons, corners and cuffs. It can be used in conjunction with all ARDEX composite seals and is suitable for all load classes.
• impermeable to water and weatherproof
• highly tear-resistant and stretchable
• alkali resistant
• resistant to aggressive media

Color: white
Weight approx.: 180 g / m ²
Thickness: 0.32 mm
Width: 120 mm
Temperature resistance: -35 ° C to + 90 ° C
Folding bending test at -20 ° C: no cracks
Bursting pressure: 1.5 bar
Permissible motion recording: Max. 80% of the joint width
Packing: Carton with 1 roll of 50 m each; Carton with 1 roll each at 10 m
Storage: In cool, dry rooms approx. Can be stored for 24 months in the original closed container.

Code: –
Barcode: –

Suitable for External Use or Wet Areas
Yes
Not suitable for swimming pools

Suitable for Use with Under Tile Heating
Yes

Skin Forming Time
5 minutes

Coverage
Approximately 9m per 310ml cartridge with a 6x6mm bead

Product Code: 10616
Barcode: 9006445047298
Packaging: bags of 25 kg net
Cement base
Meets the C2 requirements according to EN 12004
Waterproof
Frost resistant
Flexible
Setting and laying of earthenware tiles,
Stoneware and porcelain stoneware as well
Insulation materials
High area coverage thanks to low consumption
Good stability
Easy processability
Long processing time
Storage: can be stored in dry rooms for about 12 months in the originally closed container
Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder
Bulk weight: about 1.2 kg / l
Fresh weight of the mortar: about 1.5 kg / l
Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm

Product Code:
1002
Barcode:
9006445046345
Suitable for External Use or Wet Areas:
Yes, including swimming pools
Suitable for Use with Under Tile Heating:
Yes
Colours Available:
Grey & White
Unit Size Available:
20kg & 10kg
Bed Thickness:
1-6mm
Pot Life:
3 hours
Open Time:
60 minutes
Adjustment Time:
30 minutes
Grout After:
Walls – 8 hours
Floors – 24 hours
Coverage:
Approximately 8m² per 20kg bag using an 8mm x 8mm notch trowel