Baumit StarContact White

Article No.: 1906

Barcode:

Length: 2.4 m

Product Code: –

Barcode: –

Open Time: Up to 30 minutes
Pot Life: Approx. 1 hour
Adjustment Time: Approx. 15 – 20 minutes
Time to Grout: 2 hours
Color: Gray and White
VOC: 0
Packaging: 40 lb. (18 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened

Mixing Ratio:

5.75 – 6.75 quarts (5.4 – 6.4 L) of water per 40 lbs. (18 kg) bag
*For smaller batches, use 2.5 parts powder to 1 part water by volume

Approximate Coverage per 40 lbs. (18 kg) bag:

1/4” x 1/4” Sq. Notch trowel; 95 sq. ft. (8.8 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch trowel; 75 sq. ft. (7 sq. m)
1/2” x 1/2” Sq. Notch trowel; 55 sq. ft. (5 sq. m)

Product Code: 1089
Barcode: 9006445046499
Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder
Bulk weight: approx. 1.4 kg/l
Fresh weight of the mortar: approx. 1.6 kg/l
Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm
Working time (at +20°C): approx. 4 hours
Laying time: approx. 30 minutes
Correction time: approx. 15–20 minutes
Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible
Grouting of walls (at +20°C): after approx. 8 hours
underfloor heating suitability: yes
Packaging: bags of 25 kg, net
Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging

Use:

Colours: Gray, Zement grey, Silbergray, Basalt
Mixing ratio approx.
Component A                     Component B
2.4 l water                          12.5 kg powder
1 RT water                          4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm                   Width in cm                   Consumption 
60                                            60                                          0.30 kg / m ²
30                                            60                                          0.40 kg / m ²
30                                            30                                          0.50 kg / m ²
15                                             15                                           1.00 kg / m ²
10                                            10                                           1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.40 kg / l
Fresh weight approx.: 2.10 kg / l
Processing time approx.:45 minute ( n )
Accessibility after approx.:90 minute ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness                     time
40 N / mm ²              after 1 day
50 N / mm ²              after 3 days
60 N / mm ²            after 7 days
70 N / mm ²            after 28 days
Floor heating suitability: Yes
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

• Code: 2494
• Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Use:
Inside and outside. Floor and wall.
For grouting

• Tiles made of earthenware, stoneware and porcelain stoneware
• Natural and concrete slabs ( insensitive to moisture )
• Fission and clinker plates
• Facade strap
• Blending and visible masonry
• Glass blocks.

For joint widths of 2 – 15 mm.
Colours: gray
Mixing ratio approx.
Component A                     Component B
2.5 l water                          12.5 kg powder
1 RT water                         3.4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm                   Width in cm                   Consumption 
60                                            60                                          0.20 kg / m ²
30                                            60                                          0.30 kg / m ²
30                                            30                                          0.50 kg / m ²
15                                             15                                           1.00 kg / m ²
10                                            10                                           1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.50 kg / l
Fresh weight approx.: 2.20 kg / l
Processing time approx.: 90 minute ( n )
Accessibility after approx.: 5 hours ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness                     time
60 N / mm ²              after 1 day
80 N / mm ²              after 3 days
100 N / mm ²            after 7 days
120 N / mm ²            after 28 days
Floor heating suitability: Yes
Tested according to DIN EN 13888: CG2 A
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.