White flexible, thin-layer adhesive (C2TE, EN 12004) for gluing tiles and low-absorbency ceramics, mosaics, stone, on all common building substrates.
for indoor and outdoor use
extended open time
suitable for underfloor heating
Before starting work, it is necessary to check the suitability of the substrate. It is necessary to properly prepare gypsum substrates in damp areas (kitchens, bathrooms) before laying, applying foundations or waterproofing, see ÖNORM B 2207, standard contract for the laying of ceramic tiles, cooler tiles and mosaics.
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Product Code: 10616 Barcode: 9006445047298 Packaging: bags of 25 kg net Cement base Meets the C2 requirements according to EN 12004 Waterproof Frost resistant Flexible Setting and laying of earthenware tiles, Stoneware and porcelain stoneware as well Insulation materials High area coverage thanks to low consumption Good stability Easy processability Long processing time Storage: can be stored in dry rooms for about 12 months in the originally closed container Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder Bulk weight: about 1.2 kg / l Fresh weight of the mortar: about 1.5 kg / l Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm
Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
Plating on heating lines.
Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx. Component AComponent B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder Material requirement teeth ( mm ) Material requirements:
3 x 3 x 3 1.6 kg / m ²
6 x 6 x 6 2.4 kg / m ²
8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l Fresh weight approx.: 1.37 kg / l Processing time approx.: 60 minute ( n ) Insert time ( EN 1346 ) approx.: 15 minutes Correction time approx.: 30 minutes Accessibility after approx.: 3 hours, then grouting possible Application of environmental conditions: + 20 ° C Floor heating suitability: Yes Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate Packaging: Sacks with 25 kg net Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
