Baumit Baumacol FlexUni

• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Product Code: 1089
Barcode: 9006445046499
Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder
Bulk weight: approx. 1.4 kg/l
Fresh weight of the mortar: approx. 1.6 kg/l
Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm
Working time (at +20°C): approx. 4 hours
Laying time: approx. 30 minutes
Correction time: approx. 15–20 minutes
Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible
Grouting of walls (at +20°C): after approx. 8 hours
underfloor heating suitability: yes
Packaging: bags of 25 kg, net
Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging

Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder
Bulk 
weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l
material requirements:  at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .

The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method.
Processing time (+20 ° C): approx. 30 minutes
Accessibility (+20 ° C): after approx. 90 minutes
Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm²
floor heating suitability: yes
labeling according to GHS / CLP: see safety
labeling ADR: see safety
packaging: bag with 5 kg of net packed into 4 pieces
storage: Can be stored in dry rooms for approx. 12 months in the originally closed container

Product Code: –
Barcode: 9006445044570
Usage:

• For inside and outside, wall and floor.
• Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
• Plating on heating lines.
• Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
• For discoloration-free gluing of natural stone tiles and natural stone slabs.

Mixing ratio approx.
Component A                  Component B
4 – 6 l water                          25 kg powder
1 RT water                             6.25 RT powder
1 RT water                             4.25 RT powder
Material requirement teeth ( mm ) Material requirements:

• • 3 x 3 x 3 1.6 kg / m ²
  • 6 x 6 x 6 2.4 kg / m ²
  • 8 x 8 x 8 3.6 kg / m ²

Bulk weight approx.: 1.80 kg / l
Fresh weight approx.: 1.37 kg / l
Processing time approx.: 60 minute ( n )
Insert time ( EN 1346 ) approx.: 15 minutes
Correction time approx.: 30 minutes
Accessibility after approx.: 3 hours, then grouting possible
Application of environmental conditions: + 20 ° C
Floor heating suitability: Yes
Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate
Packaging: Sacks with 25 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

PRODUCT CODE: 4538
SIZE: 60 x 120 x 2cm
SERIES: Elysian
CODE: 01
STYLE: Modern
THICKNESS: 2cm
WEIGHT PER BOX: 32kg
EFFECT: Cement
SURFACE: Antislip
QUANTITY FOR BOX: 0.72 m2
BOXES FOR PALLETS: 20

Product Code:
1002
Barcode:
9006445046345
Suitable for External Use or Wet Areas:
Yes, including swimming pools
Suitable for Use with Under Tile Heating:
Yes
Colours Available:
Grey & White
Unit Size Available:
20kg & 10kg
Bed Thickness:
1-6mm
Pot Life:
3 hours
Open Time:
60 minutes
Adjustment Time:
30 minutes
Grout After:
Walls – 8 hours
Floors – 24 hours
Coverage:
Approximately 8m² per 20kg bag using an 8mm x 8mm notch trowel

Code: 4033
Size: 60×120
Thickness: 12 mm
Producer: Gigacer
Collection: Concrete
Color: Shades of white
Surface: Matte
Type: Porcelain tile
Application: Wall / Floor, Outside, Inside
Frost resistance: Yes
Rectified: Yes
Pieces per package: 2
Meterage in Op.: 1.44 m²
Weight pack: 41 kg

Use:
Inside and outside. Floor and wall.
For grouting

• Tiles made of earthenware, stoneware and porcelain stoneware
• Natural and concrete slabs ( insensitive to moisture )
• Fission and clinker plates
• Facade strap
• Blending and visible masonry
• Glass blocks.

For joint widths of 2 – 15 mm.
Colours: gray
Mixing ratio approx.
Component A                     Component B
2.5 l water                          12.5 kg powder
1 RT water                         3.4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm                   Width in cm                   Consumption 
60                                            60                                          0.20 kg / m ²
30                                            60                                          0.30 kg / m ²
30                                            30                                          0.50 kg / m ²
15                                             15                                           1.00 kg / m ²
10                                            10                                           1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.50 kg / l
Fresh weight approx.: 2.20 kg / l
Processing time approx.: 90 minute ( n )
Accessibility after approx.: 5 hours ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness                     time
60 N / mm ²              after 1 day
80 N / mm ²              after 3 days
100 N / mm ²            after 7 days
120 N / mm ²            after 28 days
Floor heating suitability: Yes
Tested according to DIN EN 13888: CG2 A
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.