White flexible, thin-layer adhesive (C2TE, EN 12004) for gluing tiles and low-absorbency ceramics, mosaics, stone, on all common building substrates.
for indoor and outdoor use
extended open time
suitable for underfloor heating
Before starting work, it is necessary to check the suitability of the substrate. It is necessary to properly prepare gypsum substrates in damp areas (kitchens, bathrooms) before laying, applying foundations or waterproofing, see ÖNORM B 2207, standard contract for the laying of ceramic tiles, cooler tiles and mosaics.
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Accessibility: (+20 °C): After sufficient hardening after approximately 12 hours
Capacity: ARDEX RG 12 1-6 is already accessible after a hardening period of 12 hours at temperatures of +18 °C to +20 °C and can be mechanically loaded.
ARDEX RG 12 1-6 is water-tight, frost-resistant and weather-tight after hardening.
Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
Plating on heating lines.
Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx. Component AComponent B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder Material requirement teeth ( mm ) Material requirements:
3 x 3 x 3 1.6 kg / m ²
6 x 6 x 6 2.4 kg / m ²
8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l Fresh weight approx.: 1.37 kg / l Processing time approx.: 60 minute ( n ) Insert time ( EN 1346 ) approx.: 15 minutes Correction time approx.: 30 minutes Accessibility after approx.: 3 hours, then grouting possible Application of environmental conditions: + 20 ° C Floor heating suitability: Yes Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate Packaging: Sacks with 25 kg net Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Product Code: 1089 Barcode: 9006445046499 Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder Bulk weight: approx. 1.4 kg/l Fresh weight of the mortar: approx. 1.6 kg/l Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm Working time(at +20°C): approx. 4 hours Laying time: approx. 30 minutes Correction time: approx. 15–20 minutes Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible Grouting of walls (at +20°C): after approx. 8 hours underfloor heating suitability: yes Packaging: bags of 25 kg, net Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging
Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
