White flexible, thin-layer adhesive (C2TE, EN 12004) for gluing tiles and low-absorbency ceramics, mosaics, stone, on all common building substrates.
for indoor and outdoor use
extended open time
suitable for underfloor heating
Before starting work, it is necessary to check the suitability of the substrate. It is necessary to properly prepare gypsum substrates in damp areas (kitchens, bathrooms) before laying, applying foundations or waterproofing, see ÖNORM B 2207, standard contract for the laying of ceramic tiles, cooler tiles and mosaics.
Be the first to review “Baumit Baumacol FlexUni White” Cancel reply
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Discoloration-free laying of natural stone and natural stone slabs in the thin bed.
Plating on heating lines.
Creation and laying of light, translucent marble slabs and other natural stone slabs with a translucent character.
For discoloration-free gluing of natural stone tiles and natural stone slabs.
Mixing ratio approx. Component AComponent B
4 – 6 l water 25 kg powder
1 RT water 6.25 RT powder
1 RT water 4.25 RT powder Material requirement teeth ( mm ) Material requirements:
3 x 3 x 3 1.6 kg / m ²
6 x 6 x 6 2.4 kg / m ²
8 x 8 x 8 3.6 kg / m ²
Bulk weight approx.: 1.80 kg / l Fresh weight approx.: 1.37 kg / l Processing time approx.: 60 minute ( n ) Insert time ( EN 1346 ) approx.: 15 minutes Correction time approx.: 30 minutes Accessibility after approx.: 3 hours, then grouting possible Application of environmental conditions: + 20 ° C Floor heating suitability: Yes Temperature resistance after curing and completed reaction: -25 ° C to + 70 ° C
GISCODE ZP1 = cement-containing product, low chromate Packaging: Sacks with 25 kg net Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder Bulk weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l material requirements: at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .
for 60 x 60 cm ca. 0,10 kg/m²
for 30 x 60 cm ca. 0,15 kg/m²
for 30 x 30 cm ca. 0,20 kg/m²
for 15 x 15 cm ca. 0,35 kg/m²
for 10 x 10 cm ca. 0,50 kg/m²
for 5 x 5 cm ca. 1,00 kg/m²
The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method. Processing time (+20 ° C): approx. 30 minutes Accessibility (+20 ° C): after approx. 90 minutes Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm² floor heating suitability: yes labeling according to GHS / CLP: see safety labeling ADR: see safety packaging: bag with 5 kg of net packed into 4 pieces storage: Can be stored in dry rooms for approx. 12 months in the originally closed container
Product Code: 10616 Barcode: 9006445047298 Packaging: bags of 25 kg net Cement base Meets the C2 requirements according to EN 12004 Waterproof Frost resistant Flexible Setting and laying of earthenware tiles, Stoneware and porcelain stoneware as well Insulation materials High area coverage thanks to low consumption Good stability Easy processability Long processing time Storage: can be stored in dry rooms for about 12 months in the originally closed container Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder Bulk weight: about 1.2 kg / l Fresh weight of the mortar: about 1.5 kg / l Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm
Product Code:
1167 Barcode:
9006445046352 Colors Available: Grey Unit Size Available: 20kg Suitable for External Use or Wet Areas
Yes, including swimming pools Suitable for Use with Under Tile Heating Yes Bed Thickness
1-6mm Pot Life
3 hours Open Time
60 minutes Adjustment Time 30 minutes Grout After 24 hours Coverage Approximately 5.6m2 at 3mm thick per 20kg bag
Use:
Inside and outside. Floor and wall.
For grouting
Tiles made of earthenware, stoneware and porcelain stoneware
Natural and concrete slabs ( insensitive to moisture )
Fission and clinker plates
Facade strap
Blending and visible masonry
Glass blocks.
For joint widths of 2 – 15 mm. Colours: gray Mixing ratio approx. Component AComponent B
2.5 l water 12.5 kg powder
1 RT water 3.4 RT powder applies to: Joint width 10 mm, joint depth 5 mm for tiles Material requirements approx. Length in cm Width in cm Consumption
60 60 0.20 kg / m ²
30 60 0.30 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ² Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method Bulk weight approx.: 1.50 kg / l Fresh weight approx.: 2.20 kg / l Processing time approx.: 90 minute ( n ) Accessibility after approx.: 5 hours ( n ) Application of environmental conditions: + 20 ° C Ball pressure hardness approx.: hardness time
60 N / mm ² after 1 day
80 N / mm ² after 3 days
100 N / mm ² after 7 days
120 N / mm ² after 28 days Floor heating suitability: Yes Tested according to DIN EN 13888: CG2 A packaging: Sacks with 12.5 kg net storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Reviews
There are no reviews yet.