Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder Bulk weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l material requirements: at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .
for 60 x 60 cm ca. 0,10 kg/m²
for 30 x 60 cm ca. 0,15 kg/m²
for 30 x 30 cm ca. 0,20 kg/m²
for 15 x 15 cm ca. 0,35 kg/m²
for 10 x 10 cm ca. 0,50 kg/m²
for 5 x 5 cm ca. 1,00 kg/m²
The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method. Processing time (+20 ° C): approx. 30 minutes Accessibility (+20 ° C): after approx. 90 minutes Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm² floor heating suitability: yes labeling according to GHS / CLP: see safety labeling ADR: see safety packaging: bag with 5 kg of net packed into 4 pieces storage: Can be stored in dry rooms for approx. 12 months in the originally closed container
Flex joint mortar for wide joints. Indoor and outdoor, on the wall and floor.
ARDEX G 7 FLEX 2-15 is particularly suitable for wide joints and large areas. The high deformability and good flank adhesion reduce stress on thermally stressed surfaces and contribute significantly to the safety of the coverings. After hardening, ARDEX G 7 FLEX has 2-15 water and dirt repellent properties, which ensure a long-lasting beautiful look and thus maintain the value of the coverings. ARDEX G 7 FLEX 2-15 is easy to process, has a high filling power and does not burn up. The area of application includes joints of tiles made of earthenware, stoneware and porcelain stoneware, split and clinker plates as well as non-humid sensitive natural and concrete stone slabs on the wall and floor, indoors and outdoors.ARDEX G 7 FLEX 2-15 meets the requirements CG2 WA according to EN 13888 and is very low in emissions – EC 1 PLUS – according to GEV EMICODE.
PRODUCT HIGHLIGHTS:
cement-bound flex grout
ideal for large areas
highly deformable
good flank adhesion
water and dirt repellent
high strength
suitable for floor and wall heating
Colours: Gray, Zement grey, Silbergray, Basalt Mixing ratio approx. Component AComponent B
2.4 l water 12.5 kg powder
1 RT water 4 RT powder applies to: Joint width 10 mm, joint depth 5 mm for tiles Material requirements approx. Length in cm Width in cm Consumption
60 60 0.30 kg / m ²
30 60 0.40 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ² Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method Bulk weight approx.: 1.40 kg / l Fresh weight approx.: 2.10 kg / l Processing time approx.:45 minute ( n ) Accessibility after approx.:90 minute ( n ) Application of environmental conditions: + 20 ° C Ball pressure hardness approx.: hardness time
40 N / mm ² after 1 day
50 N / mm ² after 3 days
60 N / mm ² after 7 days
70 N / mm ² after 28 days Floor heating suitability: Yes packaging: Sacks with 12.5 kg net storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Product Code: – Barcode: – Container: 12.5 kg paper sack Color: Brilliance white, Silver Grey, Cement Grey Mixing ratio: approx. 3.5 l water: 12.5 kg powder corresponding to
approx. 1 part water: 2.75 part powder Bulk weight: approx. 1.3 kg / l fresh weight of the mortar: approx. 2.1 kg / l material requirement : with joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic.
von 60 x 60 cm ca. 0,10 kg/m²
from 60 x 30 cm approx. 0.15 kg / m 2
von 30 x 30 cm ca. 0,20 kg/m²
von 15 x 15 cm ca. 0,35 kg/m²
from 10 x 10 cm approx. 0.50 kg / m 2
from 5 x 5 cm approx. 1.00 kg / m 2
The additional losses due to excess material on the tiles amount to 0.05-0.10 kg / m 2 , depending on their surface properties and method of operation .
Processing time (+20 ° C): approx. 90 minutes Accessibility (+20 ° C): after approx. 4 hours ball indentation hardness:
after 1 day approx. 40 N / mm 2
after 3 days approx. 60 N / mm 2
after 7 days approx. 80 N / mm 2
after 28 days approx. 90 N / mm 2 suitability for underfloor heating: yes Labeling according to GHS / CLP: see safety data sheet Labeling according to ADR: see safety data sheet Packing: bag with 12.5 kg net Storage: in dry rooms approx. Can be stored for 12 months in the originally sealed container.
Use:
Inside and outside. Floor and wall.
For grouting
Tiles made of earthenware, stoneware and porcelain stoneware
Natural and concrete slabs ( insensitive to moisture )
Fission and clinker plates
Facade strap
Blending and visible masonry
Glass blocks.
For joint widths of 2 – 15 mm. Colours: gray Mixing ratio approx. Component AComponent B
2.5 l water 12.5 kg powder
1 RT water 3.4 RT powder applies to: Joint width 10 mm, joint depth 5 mm for tiles Material requirements approx. Length in cm Width in cm Consumption
60 60 0.20 kg / m ²
30 60 0.30 kg / m ²
30 30 0.50 kg / m ²
15 15 1.00 kg / m ²
10 10 1.50 kg / m ² Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method Bulk weight approx.: 1.50 kg / l Fresh weight approx.: 2.20 kg / l Processing time approx.: 90 minute ( n ) Accessibility after approx.: 5 hours ( n ) Application of environmental conditions: + 20 ° C Ball pressure hardness approx.: hardness time
60 N / mm ² after 1 day
80 N / mm ² after 3 days
100 N / mm ² after 7 days
120 N / mm ² after 28 days Floor heating suitability: Yes Tested according to DIN EN 13888: CG2 A packaging: Sacks with 12.5 kg net storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
for grouting ceramic tiles and slabs as well as glass mosaic, glass tiles and natural stone
increased color stability
for joint widths of 1 – 10 mm
good flank adhesion
easy to insert with a long wash window
no burning
Mixing ratio:
1.7 l water: 5 kg powder
4.25 l water: 12.5 kg powder
Bulk weight: approx.1.1 kg / l Fresh weight: approx.1.8 kg / l Material requirements: with joint width 3 mm, joint depth 5 mm for tiles or. Middle mosaic
60 x 60 cm
approx. 0.1 kg / m ²
30 x 60 cm
approx. 0.15 kg / m ²
30 x 30 cm
approx. 0.2 kg / m ²
15 x 15 cm
approx. 0.35 kg / m ²
10 x 10 cm
approx. 0.45 kg / m ²
5 x 5 cm
approx. 0.9 kg / m ²
The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on the surface quality and working method.
Processing time ( + 20 ° C ): approx. 30 minutes Accessibility ( + 20 ° C ): after approx. 3 hours Ball pressure hardness:
after 1 day approx. 27 N / mm ²
after 3 days approx. 43 N / mm ²
after 7/28 days approx. 48 N / mm ²
Suitable for floor heating: Yes Labeling according to GHS / CLP: see safety data sheet Labeling according to ADR: see safety data sheet EMICODE: EC1 PLUS – very low emission PLUS GISCODE: ZP1 = cement-containing product, low chromate Packing: Plastic bucket with 5 kg net; Sacks with 12.5 kg net Storage: in dry rooms approx. Can be stored for 12 months in the original closed container.
Reviews
There are no reviews yet.