Categories: Building Materials, Concrete Finish
Tags: Cement-based, Concrete, Fillers, Finish, Wall Fillers
Brand: Ardex
Ardex B12
4,170.00ден
Article No.: –
Barcode: 9006445040077
Packaging: net 25 kg sacks
Use:
- Cement-based
- For smoothing and filling cavities
- Water- and weatherproof
Compressive strength:
- after 7 days, approx. 8 N/mm²
- after 28 days, approx. 10 N/mm²
Bending tensile strength:
- after 7 days, approx. 3 N/mm²
- after 28 days, approx. 5 N/mm²
Mixing ratio: approx. 8.5 l water : 25 kg powder corresponding to approx. 1 RT water : 2 ¾ RT powder
Bulk weight: approx. 1.1 kg/l
Fresh weight of mortar: approx. 1.7 kg/l
Material requirements: approx. 1.2 kg powder per m² and mm
Working time (+20°C): approx. 45 minutes
pH value: approx. 12
Corrosion behaviour: contains no components that have a corrosive effect on steel Identification as per GHS/CLP: GHS05 “corrosive”,
Signal word: danger Identification as per ADR: none
Storage: can be stored in a dry space in the originally sealed container for approximately 12 months
2,950.00ден
Article No.: 1924
Barcode: –
Packaging: 20 kg bucket
Amount of packaging on pallet: 24
PH value: app. 0.8
Consumption: app. 0.4 kg/m²
Yield: app. 50 m²/bucket
4,049.00ден
Article No.: –
Barcode: 4024705325547
Packing: Bucket with 18 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Material requirements approx.: 1.2 kg per m ² and mm
Consumption: Execution level:
0.2 kg / m ² 1
0.1 kg / m ² 2 based on 1
0.2 kg / m ² 3 based on 2
1.2 kg / m ² 4, full-surface filling per mm
Fresh weight approx.: 1.20 kg / l
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
2,299.00ден
Article No.: 1165
Barcode: 9006445046277
Packaging: 12.5 KG PAPER BAG
Usage:
- Compensate and repair stairs and platforms.
- Filling holes, depressions and eruptions in screeds and concrete floors.
- Sample of height offsets and bumps on all suitable substrates.
- For indoor use, floor.
Ready to install after approx.: 1 hour
Mixing ratio approx.:
Component A Component B
- 3.4 – 4 l water 12.5 kg powder
- 1 RT water 2.5 RT powder
Material requirements: 1.25 kg powder per m ² and mm
Bulk weight approx.: 1.30 kg / l
Fresh weight approx.: 1.70 kg / l
Processing time approx.: 15 minute ( n )
Accessibility after approx.: 1 hour ( n )
Application of environmental conditions: + 20 ° C
Bending tensile strength approx. time:
- 5.0 N / mm ² – after 1 day
- 6.0 N / mm ² – after 7 days
- 7.0 N / mm ² – after 28 days
Compressive strength of approx. time:
- 21 N / mm ² – after 1 day
- 29 N / mm ² – after 7 days
- 35 N / mm ² – after 28 days
Floor heating suitability: Yes
Chair roll suitability: Yes
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
530.00ден
Article No.: 1873
Barcode: 8606104246133
Packing: 20 kg bag
Number of packages on a pallet: 60
Diffusion resistance factor μ: <15
Bulk density: approx. 1200 kg / m2
Max. thickness: 3 mm (optimal thickness 2-3 mm)
Min. thickness: 1 mm
Processing time: approx. 8 h (depending on climatic conditions)
Consumption: approx. 1.2 kg / m2 / mm
Yield: approx. 16.7 m² / mm / bag
Water consumption: approx. 8 l / bag
Thermal conductivity coefficient: approx. 0.4 W / (mK)
Grain size: approx. 0.1 mm
Packing: 20 kg, 1 pallet = 60 bags = 1,200 kg
770.00ден / kg
Article No.: 1801
Barcode: 4024705306614
Use:
- optimised formula
- easier mixing
- longer processing time
Product specification
- For the design of interior wall and ceiling surfaces
- Cement-Plastic-Base
- Cures and dries quickly, without tension and cracks in all layer thicknesses
- Easy to process
- Excellent adhesion
- Very economical
Range of application
Creation of representative, creatively designed visible surfaces, e.g. in exhibition rooms, foyers, public buildings, sales rooms and in private living areas.
760.00ден
Article No.: 1932
Barcode: 3800866001350
Package: 30 kg bag
Water vapor permeability: approx. 10
Compressive strength: > 2 N / mm²
Density of the dry mixture: approx. 950 kg / m2
Maximum thickness: 25 mm on one hand
Minimum thickness: 10 mm on the wall, 8 mm on the ceiling
Tensile strength in bending: > 1 N / mm²
Consumption: approx. 8 kg / m2 / cm
Coverage: approx. 3.7 m² / bag at 10 mm plaster thickness
Grain size: 0.6 mm
Pallet: 1 pallet = 45 bags = 1,350 kg
407.00ден
Article No.: 1171
Barcode: 9006445040114
Use:
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
900.00ден / sq m
PRODUCT CODE: 4050
FINISH: Matt
THICKNESS: 12 mm
WEIGHT PER BOX: 20.2 kg
COLOR: Grey
QUANTITY FOR BOX: 0.72 m2 (4 pcs)
BOXES FOR PALLETS: 72 (51.84 m2)
KG/PALLETS: 1455 kg
0.00ден
Article No.:
Barcode: 9004329250949
Packaging: 25 kg bucket
Amount of packaging on pallet: 24
Water vapour permeability: app. 35 – 40
SD value: 0.07 – 0.08 m for a layer thickness of 2 mm
W value: < 0.1 kg/(m².h^[0,5])
Gross density: app. 1.8 kg/m²
Consumption: app. 2.9 – 4.2 kg/m²
Yield: app. 8.6 – 8.5 m²/bucket
Max. grain size: 1 mm
4,180.00ден
Use: On plaster plastic base For smoothing and filling walls and ceilings.
This wall equalization is the ideal product for making flat, smooth and stress-free walls and ceilings.
Article No.: 1059
Barcode: 9006445040114
Packing: Bucket with 25 kg net
pH value: approximately 8.00
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
Paints and glues: after drying
Specific weight: approximately 0.80 kg / l
Processing time at + 20 ° C: approximately 60 mins
Mixing ratio: approximately 16.00 l water: 25.00 kg ARDEX A 826
Ready-to-use mortar weight: approximately 1.50 kg / l
Material consumption / Material use: approximately 0.90 kg m ² / mm
Storage: Store in unopened, original packaging in dry areas for approximately 12 months.
Packaging:
- Bags with 25.00 kg net
- 40 VPE / pallet
Printing strength: after 28 days approximately 8.00 N / mm ²
Bending strength: after 28 days approximately 4.00 N / mm ²
Reviews
There are no reviews yet.