Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
- Cement-based
- For smoothing and filling cavities
- Water- and weatherproof
Compressive strength:
- after 7 days, approx. 8 N/mm²
- after 28 days, approx. 10 N/mm²
Bending tensile strength:
- after 7 days, approx. 3 N/mm²
- after 28 days, approx. 5 N/mm²
Mixing ratio: approx. 8.5 l water : 25 kg powder corresponding to approx. 1 RT water : 2 ¾ RT powder
Bulk weight: approx. 1.1 kg/l
Fresh weight of mortar: approx. 1.7 kg/l
Material requirements: approx. 1.2 kg powder per m² and mm
Working time (+20°C): approx. 45 minutes
pH value: approx. 12
Corrosion behaviour: contains no components that have a corrosive effect on steel Identification as per GHS/CLP: GHS05 “corrosive”,
Signal word: danger Identification as per ADR: none
Storage: can be stored in a dry space in the originally sealed container for approximately 12 months
- Cement-based
- Indoor and outdoor, wall and floor
- Long cement-based smoothing and fine-repair mortar, gray
Mixing ratio: approx. 6.25 – 6.75 l of water: 25 kg of powder accordingly approx. 1 RT water: 2 ¾ RT powder
Volumetric weight: approx. 1.6 kg/l
Weight of fresh mortar: approx. 1.7 kg/l
Bulk weight: approx. 1.1 kg/l
Material requirements: approx. 1.4 kg of dust / m2/mm
Processing time (+20°C): approx. 4 o’clock
Compressive strength:
- after 7 days approx. 8 N/mm2
- After 28 days approx. 18 N/mm²
Flexural strength:
- after 7 days approx. 3 N/mm2
- After 28 days approx. 5 N/mm²
pH value: approx. 12
Corrosion effect: Does not contain corrosion corrosion causative ingredients
Storage: In dry rooms, originally closed packaging