Malleable, cement-based, frost-resistant thin-bed adhesive mortar, highly tempered, grey, for laying stoneware, earthenware and porcelain stoneware tiles and slabs both indoors and outdoors, highly stable and has extended open time. This product meets the requirements of EN 12004 (C2TE).
Universal use
Flexible
Extended open time
In case of mosaic facing elements, we recommend use of a toothed smoother 3×3 mm for binding
Custom Tab Content here. Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Product Code: 10616 Barcode: 9006445047298 Packaging: bags of 25 kg net Cement base Meets the C2 requirements according to EN 12004 Waterproof Frost resistant Flexible Setting and laying of earthenware tiles, Stoneware and porcelain stoneware as well Insulation materials High area coverage thanks to low consumption Good stability Easy processability Long processing time Storage: can be stored in dry rooms for about 12 months in the originally closed container Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder Bulk weight: about 1.2 kg / l Fresh weight of the mortar: about 1.5 kg / l Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm
Product Code:
1002 Barcode:
9006445046345 Suitable for External Use or Wet Areas:
Yes, including swimming pools Suitable for Use with Under Tile Heating:
Yes Colours Available:
Grey & White Unit Size Available:
20kg & 10kg Bed Thickness:
1-6mm Pot Life:
3 hours Open Time:
60 minutes Adjustment Time: 30 minutes Grout After: Walls – 8 hours
Floors – 24 hours Coverage: Approximately 8m2 per 20kg bag using an 8mm x 8mm notch trowel
Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
Fully load-bearing: after approx. 48 hrs
Colour: grey
Can be corrected within: approx. 5 min.
Consumption:
Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing
Open time: approx. 30 min.
Rest time: none
Layer thickness: max. 5 mm
Processing time: approx. 4 hrs
Jointable/accessible: after approx. 12 hrs
Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)
Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder Bulk weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l material requirements: at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .
for 60 x 60 cm ca. 0,10 kg/m²
for 30 x 60 cm ca. 0,15 kg/m²
for 30 x 30 cm ca. 0,20 kg/m²
for 15 x 15 cm ca. 0,35 kg/m²
for 10 x 10 cm ca. 0,50 kg/m²
for 5 x 5 cm ca. 1,00 kg/m²
The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method. Processing time (+20 ° C): approx. 30 minutes Accessibility (+20 ° C): after approx. 90 minutes Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm² floor heating suitability: yes labeling according to GHS / CLP: see safety labeling ADR: see safety packaging: bag with 5 kg of net packed into 4 pieces storage: Can be stored in dry rooms for approx. 12 months in the originally closed container