Categories: Building Materials, Concrete Finish
Tags: Cement-based, Concrete, Fillers, Finish, Wall Fillers
Brand: Ardex
Ardex B12
4,170.00ден
Article No.: –
Barcode: 9006445040077
Packaging: net 25 kg sacks
Use:
- Cement-based
- For smoothing and filling cavities
- Water- and weatherproof
Compressive strength:
- after 7 days, approx. 8 N/mm²
- after 28 days, approx. 10 N/mm²
Bending tensile strength:
- after 7 days, approx. 3 N/mm²
- after 28 days, approx. 5 N/mm²
Mixing ratio: approx. 8.5 l water : 25 kg powder corresponding to approx. 1 RT water : 2 ¾ RT powder
Bulk weight: approx. 1.1 kg/l
Fresh weight of mortar: approx. 1.7 kg/l
Material requirements: approx. 1.2 kg powder per m² and mm
Working time (+20°C): approx. 45 minutes
pH value: approx. 12
Corrosion behaviour: contains no components that have a corrosive effect on steel Identification as per GHS/CLP: GHS05 “corrosive”,
Signal word: danger Identification as per ADR: none
Storage: can be stored in a dry space in the originally sealed container for approximately 12 months
770.00ден / kg
Article No.: 1801
Barcode: 4024705306614
Use:
- optimised formula
- easier mixing
- longer processing time
Product specification
- For the design of interior wall and ceiling surfaces
- Cement-Plastic-Base
- Cures and dries quickly, without tension and cracks in all layer thicknesses
- Easy to process
- Excellent adhesion
- Very economical
Range of application
Creation of representative, creatively designed visible surfaces, e.g. in exhibition rooms, foyers, public buildings, sales rooms and in private living areas.
530.00ден
Article No.: 1873
Barcode: 8606104246133
Packing: 20 kg bag
Number of packages on a pallet: 60
Diffusion resistance factor μ: <15
Bulk density: approx. 1200 kg / m2
Max. thickness: 3 mm (optimal thickness 2-3 mm)
Min. thickness: 1 mm
Processing time: approx. 8 h (depending on climatic conditions)
Consumption: approx. 1.2 kg / m2 / mm
Yield: approx. 16.7 m² / mm / bag
Water consumption: approx. 8 l / bag
Thermal conductivity coefficient: approx. 0.4 W / (mK)
Grain size: approx. 0.1 mm
Packing: 20 kg, 1 pallet = 60 bags = 1,200 kg
4,049.00ден
Article No.: –
Barcode: 4024705325547
Packing: Bucket with 18 kg net
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container
Material requirements approx.: 1.2 kg per m ² and mm
Consumption: Execution level:
0.2 kg / m ² 1
0.1 kg / m ² 2 based on 1
0.2 kg / m ² 3 based on 2
1.2 kg / m ² 4, full-surface filling per mm
Fresh weight approx.: 1.20 kg / l
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
Drying time: Layer thickness:
8 hours 1.5 mm
24 hours 3 mm
48 hours 5 mm
Application of environmental conditions: + 20 ° C / 50% rF
pH approx.: 9.5
EMICODE: EC 1 PLUS = very low emission PLUS
Product classification: Air-drying joint filler for joint filling without joint cover strips EN 13963: 4A
GISCODE: D1 = solvent-free dispersion laying materials
410.00ден
Article No.: 1934
Barcode: 3800866001640
Water vapour permeability: ≤ 15
Max. thickness: 25 per coat (on a new substrate)
Mortar group: CS II
4,870.00ден
Article No.: 3474
Barcode: 9006445047649
Packaging: 25 kg paper bag
Use:
- Cement-based
- Indoor and outdoor, wall and floor
- Long cement-based smoothing and fine-repair mortar, gray
Mixing ratio: approx. 6.25 – 6.75 l of water: 25 kg of powder accordingly approx. 1 RT water: 2 ¾ RT powder
Volumetric weight: approx. 1.6 kg/l
Weight of fresh mortar: approx. 1.7 kg/l
Bulk weight: approx. 1.1 kg/l
Material requirements: approx. 1.4 kg of dust / m2/mm
Processing time (+20°C): approx. 4 o’clock
Compressive strength:
- after 7 days approx. 8 N/mm2
- After 28 days approx. 18 N/mm²
Flexural strength:
- after 7 days approx. 3 N/mm2
- After 28 days approx. 5 N/mm²
pH value: approx. 12
Corrosion effect: Does not contain corrosion corrosion causative ingredients
Storage: In dry rooms, originally closed packaging
1,534.00ден
Article No.: 1941
Barcode: 8606104246416
Packaging: 15 l Bucket
Quantity of packaging on the pallet: 24
Consumption: about 0.2 l / m² for one coating
Yield: about 75 m² / Bucket
Density: about 1.65 kg / dm³
407.00ден
Article No.: 1171
Barcode: 9006445040114
Use:
- Ready-to-use, one-component light filler based on acrylic dispersion, solvent-free.
- For repairing cracks, holes and concrete, plaster and lightweight walls.
- shrink-free, up to 12 mm single layer thickness
- can be painted over
- flexible
- solvent free
- grindable
Packing: 310 ml cartridge
Storage: In dry rooms approx. Can be stored for 12 months in the original closed container.
Density: 0.57 g / cm ³
Grain: < 0.2 mm
Processing temperature: + 5 ° C to + 35 ° C
Temperature load: -25 ° C to + 80 ° C
Skin formation time approx.: 5 minute ( n )
2,950.00ден
Article No.: 1924
Barcode: –
Packaging: 20 kg bucket
Amount of packaging on pallet: 24
PH value: app. 0.8
Consumption: app. 0.4 kg/m²
Yield: app. 50 m²/bucket
0.00ден
Article No.:
Barcode: 9004329250949
Packaging: 25 kg bucket
Amount of packaging on pallet: 24
Water vapour permeability: app. 35 – 40
SD value: 0.07 – 0.08 m for a layer thickness of 2 mm
W value: < 0.1 kg/(m².h^[0,5])
Gross density: app. 1.8 kg/m²
Consumption: app. 2.9 – 4.2 kg/m²
Yield: app. 8.6 – 8.5 m²/bucket
Max. grain size: 1 mm
Reviews
There are no reviews yet.