Product Code: 1089
Barcode: 9006445046499
Mixing ratio: approx. 8 l of water : 25 kg of powder corresponds to approx. 1 PBV of water : 2 ¼ PBV of powder
Bulk weight: approx. 1.4 kg/l
Fresh weight of the mortar: approx. 1.6 kg/l
Material requirement: with smooth substrate
approx. 1.4 kg/m² powder
with notches, size 3 x 3 x 3 mm
approx. 2.4 kg/m² powder
with notches, size 6 x 6 x 6 mm
approx. 3.0 kg/m² powder
with notches, size 8 x 8 x8 mm
Working time (at +20°C): approx. 4 hours
Laying time: approx. 30 minutes
Correction time: approx. 15–20 minutes
Accessibility (at +20°C): upon sufficient setting, approx. after 24 hrs, then, grouting is possible
Grouting of walls (at +20°C): after approx. 8 hours
underfloor heating suitability: yes
Packaging: bags of 25 kg, net
Storage: in dry spaces, storable for approx. 12 months in the sealed original packaging

• Code: 2494
• Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder
Bulk 
weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l
material requirements:  at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .

The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method.
Processing time (+20 ° C): approx. 30 minutes
Accessibility (+20 ° C): after approx. 90 minutes
Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm²
floor heating suitability: yes
labeling according to GHS / CLP: see safety
labeling ADR: see safety
packaging: bag with 5 kg of net packed into 4 pieces
storage: Can be stored in dry rooms for approx. 12 months in the originally closed container

Product Code: 10616
Barcode: 9006445047298
Packaging: bags of 25 kg net
Cement base
Meets the C2 requirements according to EN 12004
Waterproof
Frost resistant
Flexible
Setting and laying of earthenware tiles,
Stoneware and porcelain stoneware as well
Insulation materials
High area coverage thanks to low consumption
Good stability
Easy processability
Long processing time
Storage: can be stored in dry rooms for about 12 months in the originally closed container
Mixing ratio: about 11.5 l water: 25 kg powder
accordingly
about 1 part water: 13/4 part powder
Bulk weight: about 1.2 kg / l
Fresh weight of the mortar: about 1.5 kg / l
Material requirements: on a smooth surface
approx. 1.0 kg / m2 powder
with 3 x 3 x 3 mm teeth
approx. 1.6 kg / m2 powder
with teeth 6 x 6 x 6 mm
approx. 2.2 kg / m2 powder
with teeth 8 x 8 x 8 mm

Use:

Colours: Gray, Zement grey, Silbergray, Basalt
Mixing ratio approx.
Component A                     Component B
2.4 l water                          12.5 kg powder
1 RT water                          4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm                   Width in cm                   Consumption 
60                                            60                                          0.30 kg / m ²
30                                            60                                          0.40 kg / m ²
30                                            30                                          0.50 kg / m ²
15                                             15                                           1.00 kg / m ²
10                                            10                                           1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.40 kg / l
Fresh weight approx.: 2.10 kg / l
Processing time approx.:45 minute ( n )
Accessibility after approx.:90 minute ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness                     time
40 N / mm ²              after 1 day
50 N / mm ²              after 3 days
60 N / mm ²            after 7 days
70 N / mm ²            after 28 days
Floor heating suitability: Yes
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

Code: 1992
Barcode: 3831009432762
Standard: EN 14891: 2012
Classification: CM O 2P