• 1 Component
• polystyrene-filled
• quick-reacting
• plastic-tempered bitumen
• cover coating
• quick reacting

Insulation panel adhesion: approx. 2.0 l/m²

Ground moisture / non-standing seepage water: 3.5 – 4.0 l/m² (DIN 18195-4)

Non-pressurized water (horizontal): 3.5 – 4.0 l/m² (DIN 18195-5)

Standing seepage water: 4.5 – 5.0 l/m² (DIN 18195-6)

• Code: 2494
• Material: Powdery, water and frost-free, hydraulically setting, tempered, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loading.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.4 kg/m² at 8 mm toothing,
approx. 3.1 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)