Use:

Colours: Gray, Zement grey, Silbergray, Basalt
Mixing ratio approx.
Component A                     Component B
2.4 l water                          12.5 kg powder
1 RT water                          4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm                   Width in cm                   Consumption 
60                                            60                                          0.30 kg / m ²
30                                            60                                          0.40 kg / m ²
30                                            30                                          0.50 kg / m ²
15                                             15                                           1.00 kg / m ²
10                                            10                                           1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.40 kg / l
Fresh weight approx.: 2.10 kg / l
Processing time approx.:45 minute ( n )
Accessibility after approx.:90 minute ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness                     time
40 N / mm ²              after 1 day
50 N / mm ²              after 3 days
60 N / mm ²            after 7 days
70 N / mm ²            after 28 days
Floor heating suitability: Yes
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

Use:
Inside and outside. Floor and wall.
For grouting

• Tiles made of earthenware, stoneware and porcelain stoneware
• Natural and concrete slabs ( insensitive to moisture )
• Fission and clinker plates
• Facade strap
• Blending and visible masonry
• Glass blocks.

For joint widths of 2 – 15 mm.
Colours: gray
Mixing ratio approx.
Component A                     Component B
2.5 l water                          12.5 kg powder
1 RT water                         3.4 RT powder
applies to: Joint width 10 mm, joint depth 5 mm for tiles
Material requirements approx.
Length in cm                   Width in cm                   Consumption 
60                                            60                                          0.20 kg / m ²
30                                            60                                          0.30 kg / m ²
30                                            30                                          0.50 kg / m ²
15                                             15                                           1.00 kg / m ²
10                                            10                                           1.50 kg / m ²
Note: The additional losses due to excess material on the tiles are 0.05 – 0.10 kg / m ² depending on their surface quality and working method
Bulk weight approx.: 1.50 kg / l
Fresh weight approx.: 2.20 kg / l
Processing time approx.: 90 minute ( n )
Accessibility after approx.: 5 hours ( n )
Application of environmental conditions: + 20 ° C
Ball pressure hardness approx.:
hardness                     time
60 N / mm ²              after 1 day
80 N / mm ²              after 3 days
100 N / mm ²            after 7 days
120 N / mm ²            after 28 days
Floor heating suitability: Yes
Tested according to DIN EN 13888: CG2 A
packaging: Sacks with 12.5 kg net
storage: In dry rooms approx. Can be stored for 12 months in the original closed container.

• Code: 1959
• Material: Powdery, but fibre-reinforced and dust-reducing, water and frostproof, highly tempered, hydraulically setting flexible adhesive mortar with improved full hardening for thin-bed laying. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine stoneware, natural stones for increased thermal or static loads. Especially well suited for laying tiles on tiles.
• Fully load-bearing: after approx. 48 hrs
• Colour: grey
• Can be corrected within: approx. 5 min.
• Consumption:

Consumption according to toothing:
approx. 1.7 kg/m² at 6 mm toothing,
approx. 2.3 kg/m² at 8 mm toothing,
approx. 3.0 kg/m² at 10 mm toothing

• Open time: approx. 30 min.
• Rest time: none
• Layer thickness: max. 5 mm
• Processing time: approx. 4 hrs
• Jointable/accessible: after approx. 12 hrs
• Water consumption: approx. 0.32 l/kg (corresponds to 8 l / 25 kg)

Mixing ratio: approx. 1.1 l water: 5 kg powder corresponding to
approx. 1 part water: 3.4 part powder
Bulk 
weight : approx. 1.3 kg / l fresh weight of the mortar: approx. 2.0 kg / l
material requirements:  at Joint width 3 mm, joint depth 5 mm
for tiles or medium mosaic .

The additional losses due to excess material on the tiles amount to
0.05–0.10 kg / m² , depending on their surface properties and working method.
Processing time (+20 ° C): approx. 30 minutes
Accessibility (+20 ° C): after approx. 90 minutes
Ball indentation hardness:
after 1 day approx. 40 N / mm²
after 3 days approx. 55 N / mm²
after 7 days approx. 75 N / mm²
after 28 days, approximately 80 N / mm²
floor heating suitability: yes
labeling according to GHS / CLP: see safety
labeling ADR: see safety
packaging: bag with 5 kg of net packed into 4 pieces
storage: Can be stored in dry rooms for approx. 12 months in the originally closed container